+ case "${usergroup_phase}" in + local run_cmd + run_cmd=run_su + shift + run_su /opt/pkg/bin/bmake configure BATCH=1 DEPENDS_TARGET=/nonexistent WRKLOG=/tmp/bulklog/stellarium-23.4nb1/work.log + su pbulk -c '"$@"' make /opt/pkg/bin/bmake configure BATCH=1 DEPENDS_TARGET=/nonexistent WRKLOG=/tmp/bulklog/stellarium-23.4nb1/work.log => Bootstrap dependency digest>=20211023: found digest-20220214 => Checksum BLAKE2s OK for stellarium-23.4.tar.xz => Checksum SHA512 OK for stellarium-23.4.tar.xz ===> Installing dependencies for stellarium-23.4nb1 ========================================================================== The following variables will affect the build process of this package, stellarium-23.4nb1. Their current value is shown below: * JPEG_DEFAULT = jpeg * SSLBASE (defined) * SSLCERTBUNDLE (not defined) * SSLCERTS = /etc/opt/pkg/openssl/certs * SSLDIR = /etc/opt/pkg/openssl * SSLKEYS = /etc/opt/pkg/openssl/private Based on these variables, the following variables have been set: * JPEGBASE (defined, but empty) * JPEG_TYPE = jpeg You may want to abort the process now with CTRL-C and change the value of variables in the first group before continuing. Be sure to run `/opt/pkg/bin/bmake clean' after the changes. ========================================================================== => Tool dependency cmake>=0: found cmake-3.28.3 => Tool dependency glib2-tools-[0-9]*: found glib2-tools-2.78.4 => Tool dependency mktools-[0-9]*: found mktools-20220614 => Tool dependency gettext-tools>=0.15: found gettext-tools-0.22.4 => Tool dependency perl>=5.0: found perl-5.38.2 => Tool dependency cwrappers>=20150314: found cwrappers-20220403 => Tool dependency checkperms>=1.1: found checkperms-1.12 => Build dependency xorgproto>=2016.1: found xorgproto-2023.2 => Build dependency xcb-proto>=1.15.2nb3: found xcb-proto-1.16.0nb1 => Full dependency libiconv>=1.9.1nb4: found libiconv-1.17 => Full dependency gettext-lib>=0.22: found gettext-lib-0.22.4 => Full dependency qt6-qttools>=6.6.0nb2: found qt6-qttools-6.6.1nb1 => Full dependency png>=1.6.0nb1: found png-1.6.42 => Full dependency exiv2>=0.28.0: found exiv2-0.28.1 => Full dependency hicolor-icon-theme>=0.9nb1: found hicolor-icon-theme-0.17nb1 => Full dependency qt6-qtcharts>=6.6.0nb2: found qt6-qtcharts-6.6.1 => Full dependency qt6-qtmultimedia>=6.6.1nb2: found qt6-qtmultimedia-6.6.1nb2 => Full dependency qt6-qtserialport>=6.6.0nb2: found qt6-qtserialport-6.6.1 ===> Overriding tools for stellarium-23.4nb1 ===> Extracting for stellarium-23.4nb1 ===> Patching for stellarium-23.4nb1 => Applying pkgsrc patches for stellarium-23.4nb1 => Verifying /data/jenkins/workspace/pkgsrc-upstream-trunk/misc/stellarium/patches/patch-CMakeLists.txt => Applying pkgsrc patch /data/jenkins/workspace/pkgsrc-upstream-trunk/misc/stellarium/patches/patch-CMakeLists.txt Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |$NetBSD: patch-CMakeLists.txt,v 1.11 2024/01/01 11:32:45 adam Exp $ | |Do not use ccache. |Do not use application bundle on Darwin. | |--- CMakeLists.txt.orig 2023-12-23 10:10:33.000000000 +0000 |+++ CMakeLists.txt -------------------------- Patching file CMakeLists.txt using Plan A... Hunk #1 succeeded at 197. Hunk #2 succeeded at 251. Hunk #3 succeeded at 356. Hunk #4 succeeded at 826. Hunk #5 succeeded at 975. done => Verifying /data/jenkins/workspace/pkgsrc-upstream-trunk/misc/stellarium/patches/patch-data_CMakeLists.txt => Applying pkgsrc patch /data/jenkins/workspace/pkgsrc-upstream-trunk/misc/stellarium/patches/patch-data_CMakeLists.txt Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |$NetBSD: patch-data_CMakeLists.txt,v 1.2 2022/10/03 09:07:03 adam Exp $ | |Do not use application bundle on Darwin. | |--- data/CMakeLists.txt.orig 2022-09-21 12:07:05.000000000 +0000 |+++ data/CMakeLists.txt -------------------------- Patching file data/CMakeLists.txt using Plan A... Hunk #1 succeeded at 30 (offset 6 lines). Hunk #2 succeeded at 54 (offset 6 lines). done => Verifying /data/jenkins/workspace/pkgsrc-upstream-trunk/misc/stellarium/patches/patch-doc_CMakeLists.txt => Applying pkgsrc patch /data/jenkins/workspace/pkgsrc-upstream-trunk/misc/stellarium/patches/patch-doc_CMakeLists.txt Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |$NetBSD: patch-doc_CMakeLists.txt,v 1.4 2022/12/28 19:12:30 adam Exp $ | |Install man pages also on Darwin. |Use correct path to install man pages. | |--- doc/CMakeLists.txt.orig 2022-12-25 14:37:17.000000000 +0000 |+++ doc/CMakeLists.txt -------------------------- Patching file doc/CMakeLists.txt using Plan A... Hunk #1 succeeded at 2. Hunk #2 succeeded at 22. done => Verifying /data/jenkins/workspace/pkgsrc-upstream-trunk/misc/stellarium/patches/patch-src_CMakeLists.txt => Applying pkgsrc patch /data/jenkins/workspace/pkgsrc-upstream-trunk/misc/stellarium/patches/patch-src_CMakeLists.txt Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |$NetBSD: patch-src_CMakeLists.txt,v 1.2 2022/11/02 10:48:33 adam Exp $ | |Do not use application bundle on Darwin. | |--- src/CMakeLists.txt.orig 2022-10-31 16:15:58.000000000 +0000 |+++ src/CMakeLists.txt -------------------------- Patching file src/CMakeLists.txt using Plan A... Hunk #1 succeeded at 568 (offset 18 lines). done => Verifying /data/jenkins/workspace/pkgsrc-upstream-trunk/misc/stellarium/patches/patch-src_StelLogger.cpp => Applying pkgsrc patch /data/jenkins/workspace/pkgsrc-upstream-trunk/misc/stellarium/patches/patch-src_StelLogger.cpp Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |$NetBSD: patch-src_StelLogger.cpp,v 1.1 2023/09/30 17:14:46 adam Exp $ | |Fix build for BSD. | |--- src/StelLogger.cpp.orig 2023-09-30 18:40:03.709676791 +0000 |+++ src/StelLogger.cpp -------------------------- Patching file src/StelLogger.cpp using Plan A... Hunk #1 succeeded at 214. done => Verifying /data/jenkins/workspace/pkgsrc-upstream-trunk/misc/stellarium/patches/patch-src_core_StelFileMgr.cpp => Applying pkgsrc patch /data/jenkins/workspace/pkgsrc-upstream-trunk/misc/stellarium/patches/patch-src_core_StelFileMgr.cpp Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |$NetBSD: patch-src_core_StelFileMgr.cpp,v 1.3 2022/10/03 09:07:03 adam Exp $ | |On Darwin, do not use bundles. | |--- src/core/StelFileMgr.cpp.orig 2022-09-21 12:07:19.000000000 +0000 |+++ src/core/StelFileMgr.cpp -------------------------- Patching file src/core/StelFileMgr.cpp using Plan A... Hunk #1 succeeded at 104 (offset 1 line). done ===> Creating toolchain wrappers for stellarium-23.4nb1 ===> Configuring for stellarium-23.4nb1 => Checking for portability problems in extracted files -- Found CMake 3.28.3 -- The C compiler identification is GNU 13.2.0 -- The CXX compiler identification is GNU 13.2.0 -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: /home/pbulk/build/misc/stellarium/work/.cwrapper/bin/gcc - skipped -- Detecting C compile features -- Detecting C compile features - done -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Check for working CXX compiler: /home/pbulk/build/misc/stellarium/work/.cwrapper/bin/g++ - skipped -- Detecting CXX compile features -- Detecting CXX compile features - done -- Performing Test HAVE_STDATOMIC -- Performing Test HAVE_STDATOMIC - Success -- Platform: SunOS-5.11 (i386) -- Building Stellarium 24.4 (v24.4.0; Mode: Release) Detected locale "C" with character encoding "646", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. -- Found Qt6: /opt/pkg/qt6/bin/qmake (found suitable version 6.6.1) -- Found OpenGL: /opt/pkg/lib/libGL.so -- Found WrapOpenGL: TRUE -- Found XKB: /opt/pkg/lib/libxkbcommon.so (Required is at least version "0.5.0") -- Building an OpenGL build -- GPS: disabled. -- Unit tests support: disabled -- Using system-provided zlib at /opt/pkg/lib/libz.so -- Could NOT find QXlsx (missing: QXlsx_DIR) -- CPM: Adding package QXlsxQt6@1.4.6 (1.4.6) Current Path of QXlsx /home/pbulk/build/misc/stellarium/work/stellarium-23.4/cmake-pkgsrc-build/_deps/qxlsxqt6-src/QXlsx/../ /home/pbulk/build/misc/stellarium/work/stellarium-23.4/cmake-pkgsrc-build/_deps/qxlsxqt6-src/QXlsx/../QXlsx/header/ /home/pbulk/build/misc/stellarium/work/stellarium-23.4/cmake-pkgsrc-build/_deps/qxlsxqt6-src/QXlsx/../QXlsx/source/ -- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE) -- CPM: Adding package indiclient@1.8.5 (1.8.5) CMake Warning (dev) in doc/CMakeLists.txt: A logical block opening on the line /home/pbulk/build/misc/stellarium/work/stellarium-23.4/doc/CMakeLists.txt:5 (IF) closes on the line /home/pbulk/build/misc/stellarium/work/stellarium-23.4/doc/CMakeLists.txt:26 (ENDIF) with mis-matching arguments. This warning is for project developers. Use -Wno-dev to suppress it. CMake Warning at plugins/OnlineQueries/src/CMakeLists.txt:48 (MESSAGE): Qt6::WebEngineWidgets or its dependencies (Positioning, WebChannel, WebEngineCore) not found. If these packages exist for your platform, install and rerun. Else the program will call the system web browser where required. -- Found Python3: /opt/pkg/bin/python3.11 (found version "3.11.8") found components: Interpreter -- Found ZLIB: /opt/pkg/lib/libz.so (found version "1.3.1") -- Found EXPAT: /opt/pkg/lib/libexpat.so (found version "2.6.0") -- CPM: Adding package NLopt@2.7.1 (2.7.1) CMake Deprecation Warning at cmake-pkgsrc-build/_deps/nlopt-src/CMakeLists.txt:15 (cmake_minimum_required): Compatibility with CMake < 3.5 will be removed from a future version of CMake. Update the VERSION argument value or use a ... suffix to tell CMake that the project does not need compatibility with older versions. -- NLopt version 2.7.1 -- Looking for getopt.h -- Looking for getopt.h - found -- Looking for unistd.h -- Looking for unistd.h - found -- Looking for stdint.h -- Looking for stdint.h - found -- Looking for time.h -- Looking for time.h - found -- Looking for sys/time.h -- Looking for sys/time.h - found -- Looking for getpid -- Looking for getpid - found -- Looking for syscall -- Looking for syscall - found -- Looking for isinf -- Looking for isinf - not found -- Looking for isnan -- Looking for isnan - found -- Looking for gettimeofday -- Looking for gettimeofday - found -- Looking for qsort_r -- Looking for qsort_r - found -- Looking for time -- Looking for time - found -- Looking for copysign -- Looking for copysign - not found -- Looking for getopt -- Looking for getopt - found -- Looking for sys/types.h -- Looking for sys/types.h - found -- Looking for stddef.h -- Looking for stddef.h - found -- Check size of uint32_t -- Check size of uint32_t - done -- Check size of unsigned int -- Check size of unsigned int - done -- Check size of unsigned long -- Check size of unsigned long - done -- Looking for sqrt in m -- Looking for sqrt in m - found -- Looking for fpclassify -- Looking for fpclassify - TRUE -- Performing Test HAVE_THREAD_LOCAL_STORAGE -- Performing Test HAVE_THREAD_LOCAL_STORAGE - Success -- Performing Test HAVE_THREAD_LOCAL_STORAGE -- Performing Test HAVE_THREAD_LOCAL_STORAGE - Failed -- Looking for __cplusplus -- Looking for __cplusplus - found -- Performing Test SUPPORTS_STDCXX11 -- Performing Test SUPPORTS_STDCXX11 - Success -- Performing Test HAS_FPIC -- Performing Test HAS_FPIC - Success CMake Warning (dev) at cmake-pkgsrc-build/_deps/nlopt-src/CMakeLists.txt:299 (find_package): Policy CMP0148 is not set: The FindPythonInterp and FindPythonLibs modules are removed. Run "cmake --help-policy CMP0148" for policy details. Use the cmake_policy command to set the policy and suppress this warning. This warning is for project developers. Use -Wno-dev to suppress it. -- Found PythonInterp: /opt/pkg/bin/python3.11 (found version "3.11.8") CMake Warning (dev) at cmake-pkgsrc-build/_deps/nlopt-src/CMakeLists.txt:300 (find_package): Policy CMP0148 is not set: The FindPythonInterp and FindPythonLibs modules are removed. Run "cmake --help-policy CMP0148" for policy details. Use the cmake_policy command to set the policy and suppress this warning. This warning is for project developers. Use -Wno-dev to suppress it. -- Found PythonLibs: /opt/pkg/lib/libpython3.11.so (found suitable exact version "3.11.8") CMake Warning (dev) at cmake-pkgsrc-build/_deps/nlopt-src/cmake/FindNumPy.cmake:45 (find_package): Policy CMP0148 is not set: The FindPythonInterp and FindPythonLibs modules are removed. Run "cmake --help-policy CMP0148" for policy details. Use the cmake_policy command to set the policy and suppress this warning. Call Stack (most recent call first): cmake-pkgsrc-build/_deps/nlopt-src/CMakeLists.txt:301 (find_package) This warning is for project developers. Use -Wno-dev to suppress it. -- Could NOT find NumPy (missing: NUMPY_INCLUDE_DIRS) -- Could NOT find Guile (missing: GUILE_EXECUTABLE GUILE_ROOT_DIR GUILE_INCLUDE_DIRS GUILE_LIBRARIES) -- Could NOT find SWIG (missing: SWIG_EXECUTABLE SWIG_DIR) -- Could NOT find Octave (missing: OCTAVE_EXECUTABLE OCTAVE_ROOT_DIR OCTAVE_INCLUDE_DIRS OCTAVE_LIBRARIES) -- Could NOT find Matlab (missing: Matlab_INCLUDE_DIRS Matlab_MEX_LIBRARY Matlab_MEX_EXTENSION Matlab_ROOT_DIR Matlab_MX_LIBRARY MX_LIBRARY MAIN_PROGRAM) (found version "NOTFOUND") CMake Warning at /opt/pkg/share/cmake-3.28/Modules/CPack.cmake:507 (message): CPack.cmake has already been included!! Call Stack (most recent call first): cmake-pkgsrc-build/_deps/nlopt-src/CMakeLists.txt:353 (include) -- Found exiv2 0.28.1 -- Found Threads: TRUE -- Found Gettext: /opt/pkg/bin/msgmerge (found version "0.22.4") -- Found xgettext: /opt/pkg/bin/xgettext -- Found lupdate: /opt/pkg/qt6/bin/lupdate -- Found lconvert: /opt/pkg/qt6/bin/lconvert -- Configuring done (92.9s) CMake Warning (dev) in cmake-pkgsrc-build/_deps/nlopt-src/CMakeLists.txt: Policy CMP0071 is not set: Let AUTOMOC and AUTOUIC process GENERATED files. Run "cmake --help-policy CMP0071" for policy details. Use the cmake_policy command to set the policy and suppress this warning. For compatibility, CMake is excluding the GENERATED source file(s): "/home/pbulk/build/misc/stellarium/work/stellarium-23.4/cmake-pkgsrc-build/_deps/nlopt-build/nlopt.hpp" from processing by AUTOMOC and AUTOUIC. If any of the files should be processed, set CMP0071 to NEW. If any of the files should not be processed, explicitly exclude them by setting the source file property SKIP_AUTOGEN: set_property(SOURCE file.h PROPERTY SKIP_AUTOGEN ON) This warning is for project developers. Use -Wno-dev to suppress it. -- Generating done (0.9s) -- Build files have been written to: /home/pbulk/build/misc/stellarium/work/stellarium-23.4/cmake-pkgsrc-build