+ case "${usergroup_phase}" in
+ local run_cmd
+ run_cmd=run_su
+ shift
+ run_su /opt/pkg/bin/bmake configure BATCH=1 DEPENDS_TARGET=/nonexistent WRKLOG=/tmp/bulklog/vice-3.6.1nb1/work.log
+ su pbulk -c '"$@"' make /opt/pkg/bin/bmake configure BATCH=1 DEPENDS_TARGET=/nonexistent WRKLOG=/tmp/bulklog/vice-3.6.1nb1/work.log
=> Bootstrap dependency digest>=20211023: found digest-20220214
=> Checksum BLAKE2s OK for vice-3.6.1.tar.gz
=> Checksum SHA512 OK for vice-3.6.1.tar.gz
===> Installing dependencies for vice-3.6.1nb1
==========================================================================
The supported build options for vice are:

	alsa ffmpeg gtk3 pulseaudio sdl sdl2 vice-cpuhistory
	vice-headless vice-x64

The currently selected options are:

	ffmpeg gtk3

You can select which build options to use by setting PKG_DEFAULT_OPTIONS
or the following variable.  Its current value is shown:

	PKG_OPTIONS.vice (not defined)

==========================================================================
==========================================================================
The following variables will affect the build process of this package,
vice-3.6.1nb1.  Their current value is shown below:

        * CURSES_DEFAULT = ncurses
        * JPEG_DEFAULT = jpeg
        * PKG_SYSCONFBASE = /etc/opt/pkg
        * READLINE_DEFAULT = readline

Based on these variables, the following variables have been set:

        * CURSES_TYPE = ncurses
        * JPEGBASE (defined, but empty)
        * JPEG_TYPE = jpeg
        * READLINE_TYPE = readline
        * TERMCAP_TYPE = curses

You may want to abort the process now with CTRL-C and change the value
of variables in the first group before continuing.  Be sure to run
`/opt/pkg/bin/bmake clean' after the changes.
==========================================================================
=> Tool dependency glib2-tools>=2.56: found glib2-tools-2.70.5
=> Tool dependency xdg-utils-[0-9]*: found xdg-utils-1.1.3nb3
=> Tool dependency mktools-[0-9]*: found mktools-20220614
=> Tool dependency flex>=2.5.4a: found flex-2.6.4
=> Tool dependency gmake>=3.81: found gmake-4.3nb3
=> Tool dependency perl>=5.0: found perl-5.34.1
=> Tool dependency pkgconf-[0-9]*: found pkgconf-1.8.0
=> Tool dependency bison>=1.0: found bison-3.8.2
=> Tool dependency cwrappers>=20150314: found cwrappers-20220403
=> Tool dependency checkperms>=1.1: found checkperms-1.12
=> Build dependency xa65-[0-9]*: found xa65-2.3.13
=> Build dependency xorgproto>=2016.1: found xorgproto-2022.1
=> Build dependency xcb-proto>=1.4: found xcb-proto-1.15.2
=> Build dependency flex>=2.5.4a: found flex-2.6.4
=> Full dependency dos2unix-[0-9]*: found dos2unix-7.4.3
=> Full dependency gtk3+>=3.24.30nb1: found gtk3+-3.24.33
=> Full dependency zlib>=1.2.3: found zlib-1.2.12nb1
=> Full dependency png>=1.6.0nb1: found png-1.6.37nb1
=> Full dependency glew>=2.1.0: found glew-2.2.0nb2
=> Full dependency desktop-file-utils>=0.10nb1: found desktop-file-utils-0.26nb1
=> Full dependency ffmpeg4>=4.4nb10: found ffmpeg4-4.4.2
=> Full dependency libvorbis>=1.1.0nb1: found libvorbis-1.3.7
=> Full dependency flac>=1.1.3nb1: found flac-1.3.4
=> Full dependency lame>=3.96.1nb4: found lame-3.100nb3
=> Full dependency mpg123>=1.0.0: found mpg123-1.29.3nb1
=> Full dependency giflib>=5.2.1nb4: found giflib-5.2.1nb4
=> Full dependency libpcap>=1.3.0nb1: found libpcap-1.10.1
=> Full dependency readline>=6.0: found readline-8.1.2
===> Overriding tools for vice-3.6.1nb1
===> Extracting for vice-3.6.1nb1
===> Patching for vice-3.6.1nb1
=> Applying pkgsrc patches for vice-3.6.1nb1
=> Verifying /data/jenkins/workspace/pkgsrc-upstream-trunk/emulators/vice/patches/patch-configure
=> Applying pkgsrc patch /data/jenkins/workspace/pkgsrc-upstream-trunk/emulators/vice/patches/patch-configure
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|$NetBSD: patch-configure,v 1.5 2021/01/01 12:46:03 rhialto Exp $
|
|1. Ignore the option --enable-option-checking instead of erroring,
|   it's the default anyway.
|
|--- configure.orig	2020-12-23 12:58:34.000000000 +0000
|+++ configure
--------------------------
Patching file configure using Plan A...
Hunk #1 succeeded at 4209 (offset 36 lines).
done
=> Verifying /data/jenkins/workspace/pkgsrc-upstream-trunk/emulators/vice/patches/patch-src_arch_gtk3_data_unix_Makefile.in
=> Applying pkgsrc patch /data/jenkins/workspace/pkgsrc-upstream-trunk/emulators/vice/patches/patch-src_arch_gtk3_data_unix_Makefile.in
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|$NetBSD: patch-src_arch_gtk3_data_unix_Makefile.in,v 1.1 2021/01/01 12:46:03 rhialto Exp $
|
|Install .desktop files in the system location instead of
|the (fake) home directory.
|
|--- src/arch/gtk3/data/unix/Makefile.in.orig	2020-12-25 17:59:47.574456497 +0000
|+++ src/arch/gtk3/data/unix/Makefile.in
--------------------------
Patching file src/arch/gtk3/data/unix/Makefile.in using Plan A...
Hunk #1 succeeded at 738 (offset 1 line).
done
=> Verifying /data/jenkins/workspace/pkgsrc-upstream-trunk/emulators/vice/patches/patch-src_arch_gtk3_uicommands.c
=> Applying pkgsrc patch /data/jenkins/workspace/pkgsrc-upstream-trunk/emulators/vice/patches/patch-src_arch_gtk3_uicommands.c
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|$NetBSD: patch-src_arch_gtk3_uicommands.c,v 1.1 2021/12/29 14:31:24 rhialto Exp $
|
|We disable generating the PDF docs (because of expensive dependencies),
|so instead, try to show the cheaply generated html version.
|
|--- src/arch/gtk3/uicommands.c.orig	2021-12-24 19:27:40.000000000 +0000
|+++ src/arch/gtk3/uicommands.c
--------------------------
Patching file src/arch/gtk3/uicommands.c using Plan A...
Hunk #1 succeeded at 615 (offset 243 lines).
done
===> Creating toolchain wrappers for vice-3.6.1nb1
===> Configuring for vice-3.6.1nb1
=> Modifying GNU configure scripts to avoid --recheck
=> Replacing config-guess with pkgsrc versions
=> Replacing config-sub with pkgsrc versions
=> Replacing install-sh with pkgsrc version
=> Replacing bash interpreter in src/arch/gtk3/data/unix/mkdesktopfile.sh.
=> Fixing locale directory references.
=> Checking for portability problems in extracted files
configure: WARNING: unrecognized options: --with-libiconv-prefix
checking for a BSD-compatible install... /opt/pkg/bin/bsdinstall -c -o pbulk -g pbulk
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... ./install-sh -c -d
checking for gawk... /opt/pkg/bin/nawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
option checking is yes
checking build system type... x86_64-sun-solaris2.11
checking host system type... x86_64-sun-solaris2.11
checking for x86_64-sun-solaris2.11-cc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking for gcc option to accept ISO C99... none needed
checking how to run the C preprocessor... gcc -E
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking whether g++ supports C++11 features with -std=c++11... yes
checking how to run the C++ preprocessor... g++ -std=c++11 -E
checking for x86_64-sun-solaris2.11-cc... no
checking for x86_64-sun-solaris2.11-gcc... no
checking for x86_64-sun-solaris2.11-clang... no
checking for cc... cc
checking whether we are using the GNU Objective C compiler... yes
checking whether cc accepts -g... yes
checking dependency style of cc... gcc3
checking if the C compiler supports -W... yes
checking if the C compiler supports -Wall... yes
checking if the C compiler supports -Wextra... yes
checking if the C compiler supports -Wformat... yes
checking if the C compiler supports -Wformat-signedness... yes
checking if the C compiler supports -Wformat-pedantic... no
checking if the C compiler supports -Wshadow... yes
checking if the C compiler supports -Wpointer-arith... yes
checking if the C compiler supports -Wmissing-prototypes... yes
checking if the C compiler supports -Wstrict-prototypes... yes
checking if the C compiler supports -Wuninitialized... yes
checking if the C compiler supports -Wunreachable-code... yes
checking if the C compiler supports -Wmacro-redefined... no
checking if the C compiler supports -Werror=implicit-function-declaration... yes
checking if the C compiler supports -Wfatal-errors... yes
checking if the C compiler supports -fdiagnostics-absolute-paths... no
checking if the C compiler supports -Wshorten-64-to-32... no
checking if the C compiler supports -Wdiscarded-qualifiers... yes
checking if the C compiler supports -Wno-sign-compare... yes
checking if the C compiler supports -Wno-missing-field-initializers... yes
checking if the C compiler supports -Wno-ignored-qualifiers... yes
checking if the C compiler supports -Wno-unused-parameter... yes
checking if the C++ compiler supports -Wall... yes
checking if the C++ compiler supports -Wformat... yes
checking if the C++ compiler supports -Wformat-pedantic... no
checking if the C++ compiler supports -Wshadow... yes
checking if the C++ compiler supports -Wpointer-arith... yes
checking if the C++ compiler supports -Wuninitialized... yes
checking if the C++ compiler supports -Wunreachable-code... yes
checking if the C++ compiler supports -Wno-unused-parameter... yes
checking if the C++ compiler supports -Wmissing-prototypes... no
checking if the C++ compiler supports -Werror=implicit-function-declaration... no
checking if the C++ compiler supports -Wfatal-errors... yes
checking if the C++ compiler supports -fdiagnostics-absolute-paths... no
checking if the C++ compiler supports -Wshorten-64-to-32... no
checking if the C++ compiler supports -Wno-address-of-packed-member... yes
checking if the C++ compiler supports -Wno-char-subscripts... yes
checking if the C++ compiler supports -Wno-format-signedness... yes
checking if the C++ compiler supports -Wno-missing-prototypes... no
checking if the C++ compiler supports -Wno-c99-designator... yes
checking if the C++ compiler supports -Wno-shorten-64-to-32... yes
checking if the C++ compiler supports -Wno-nonnull-compare... yes
checking if the C compiler supports -Wno-unused-label... yes
checking if the C compiler supports -Wno-unreachable-code... yes
checking if the C compiler supports -Wno-misleading-indentation... yes
checking whether ln -s works... yes
checking for flex... flex
checking lex output file root... lex.yy
checking lex library... -lfl
checking whether yytext is a pointer... yes
checking for ld used by GCC... /bin/ld
checking if the linker (/bin/ld) is GNU ld... no
checking for ar... ar
checking for svn... (cached) no
checking for tar... /usr/bin/gtar
checking for svnversion... (cached) no
checking for byacc... /opt/pkg/bin/bison -y
checking for makeinfo... /home/pbulk/build/emulators/vice/work/.tools/bin/makeinfo
checking for dos2unix... dos2unix
checking for xa... xa
checking for perl... /opt/pkg/bin/perl
checking for makeguide... no
checking for iconv... iconv
checking for x86_64-sun-solaris2.11-ranlib... no
checking for ranlib... ranlib
checking for x86_64-sun-solaris2.11-strip... no
checking for strip... strip
checking for x86_64-sun-solaris2.11-objdump... no
checking for objdump... objdump
checking for x86_64-sun-solaris2.11-sdl-config... no
checking for sdl-config... no
checking dependency style of gcc... gcc3
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking pkg-config is at least version 0.9.0... yes
checking for time_t in time.h... yes
checking for time_t in sys/types.h... yes
checking size of time_t... 8
checking if the compiler supports -march=native... yes
checking if ar truncates object names... no
checking for native OpenMP... yes
checking for GTK... yes
checking for GLIB... yes
checking for glib-compile-resources... glib-compile-resources
checking for glib-genmarshal... glib-genmarshal
checking for GLEW... yes
checking for library containing glViewport... none required
checking for library containing glewInit... none required
checking for FONTCONFIG... yes
checking for xdg-desktop-menu... xdg-desktop-menu
xdg-desktop-menu
checking for icotool... no
checking for libiconv_open in -liconv... yes
checking if the compiler accepts --param inline-unit-growth=60... yes
checking if the compiler accepts --param max-inline-insns-single=600... yes
checking whether we are using the GNU C++ compiler... (cached) yes
checking whether g++ -std=c++11 accepts -g... (cached) yes
checking dependency style of g++ -std=c++11... (cached) gcc3
checking how to run the C++ preprocessor... g++ -std=c++11 -E
checking sys/types.h usability... yes
checking sys/types.h presence... yes
checking for sys/types.h... yes
checking for off_t... yes
checking for pid_t... yes
checking for size_t... yes
checking for ssize_t... yes
checking whether byte ordering is bigendian... no
checking size of unsigned short... 2
checking size of unsigned int... 4
checking size of unsigned long... 8
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking direct.h usability... no
checking direct.h presence... no
checking for direct.h... no
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking regex.h usability... yes
checking regex.h presence... yes
checking for regex.h... yes
checking unistd.h usability... yes
checking unistd.h presence... yes
checking for unistd.h... yes
checking strings.h usability... yes
checking strings.h presence... yes
checking for strings.h... yes
checking sys/dirent.h usability... yes
checking sys/dirent.h presence... yes
checking for sys/dirent.h... yes
checking sys/stat.h usability... yes
checking sys/stat.h presence... yes
checking for sys/stat.h... yes
checking inttypes.h usability... yes
checking inttypes.h presence... yes
checking for inttypes.h... yes
checking libgen.h usability... yes
checking libgen.h presence... yes
checking for libgen.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking dir.h usability... no
checking dir.h presence... no
checking for dir.h... no
checking io.h usability... no
checking io.h presence... no
checking for io.h... no
checking process.h usability... no
checking process.h presence... no
checking for process.h... no
checking signal.h usability... yes
checking signal.h presence... yes
checking for signal.h... yes
checking alloca.h usability... yes
checking alloca.h presence... yes
checking for alloca.h... yes
checking wchar.h usability... yes
checking wchar.h presence... yes
checking for wchar.h... yes
checking stdint.h usability... yes
checking stdint.h presence... yes
checking for stdint.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for regexp.h... yes
checking whether sys_siglist is declared... no
checking sys/capability.h usability... no
checking sys/capability.h presence... no
checking for sys/capability.h... no
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for dlopen... yes
checking linux/joystick.h usability... no
checking linux/joystick.h presence... no
checking for linux/joystick.h... no
checking machine/joystick.h usability... no
checking machine/joystick.h presence... no
checking for machine/joystick.h... no
checking sys/joystick.h usability... no
checking sys/joystick.h presence... no
checking for sys/joystick.h... no
checking for hid_get_report_desc in -lusbhid... no
checking for hid_get_report_desc in -lusb... no
checking math.h usability... yes
checking math.h presence... yes
checking for math.h... yes
checking for sqrt in -lm... yes
checking zlib.h usability... yes
checking zlib.h presence... yes
checking for zlib.h... yes
checking for zlibVersion in -lz... (cached) yes
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking for sys/time.h... (cached) yes
checking sys/select.h usability... yes
checking sys/select.h presence... yes
checking for sys/select.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking for dgettext in -lintl... yes
checking for gethostbyname in -lnsl... yes
checking for gethostbyname in -lsocket... yes
checking for gethostbyname in -lbsd... no
checking for gethostbyname in -lnet... no
checking for gethostbyname in -linet... no
checking netinet/tcp.h usability... yes
checking netinet/tcp.h presence... yes
checking for netinet/tcp.h... yes
checking for socket... yes
checking for send... yes
checking for bind... yes
checking for listen... yes
checking for gethostbyname... yes
checking for connect... yes
checking for recv... yes
checking for accept... yes
checking for htons... yes
checking for htonl... yes
checking for getdtablesize... yes
checking for getrlimit... yes
checking For socklen_t... yes
checking for in_addr_t... yes
checking for Unix domain sockets... yes
checking if IPV6 should be enabled... yes
checking struct sockaddr::ss_family... yes
checking for gethostbyname2... no
checking for getipnodebyname... yes
checking for FFMPEG support... checking pkg-config is at least version 0.9.0... yes
via pkg-config
checking for FFMPEG_AV... yes
checking libavformat/avformat.h usability... yes
checking libavformat/avformat.h presence... yes
checking for libavformat/avformat.h... yes
checking for FFMPEG_SWSCALE... yes
checking for FFMPEG_SWRESAMPLE... yes
checking if we are using glibc-2.20 and up... no
checking for gethostbyname in -lnsl... (cached) yes
checking for gethostbyname in -lsocket... (cached) yes
checking for pcap_inject in -lpcap... yes
checking for pcap_sendpacket in -lpcap... yes
checking for pcap_open_live in -lpcap... yes
checking for libnet_init in -lnet... no
checking for pcap_open_live in -lpcap... (cached) yes
checking for libnet_write_link_layer in -lnet... no
checking linux/if_tun.h usability... no
checking linux/if_tun.h presence... no
checking for linux/if_tun.h... no
checking sys/audioio.h usability... yes
checking sys/audioio.h presence... yes
checking for sys/audioio.h... yes
checking lame/lame.h usability... yes
checking lame/lame.h presence... yes
checking for lame/lame.h... yes
checking for lame lib linking... dynlib
checking for fc-cache... /opt/pkg/bin/fc-cache
checking vorbis/vorbisfile.h usability... yes
checking vorbis/vorbisfile.h presence... yes
checking for vorbis/vorbisfile.h... yes
checking for ogg_stream_flush in -logg... yes
checking for vorbis_info_clear in -lvorbis... yes
checking for ov_open_callbacks in -lvorbisfile... yes
checking for vorbis_encode_init_vbr in -lvorbisenc... yes
checking FLAC/stream_decoder.h usability... yes
checking FLAC/stream_decoder.h presence... yes
checking for FLAC/stream_decoder.h... yes
checking for FLAC__stream_decoder_get_channels in -lFLAC... yes
checking linux/hardsid.h usability... no
checking linux/hardsid.h presence... no
checking for linux/hardsid.h... no
checking linux/ppdev.h usability... no
checking linux/ppdev.h presence... no
checking for linux/ppdev.h... no
checking linux/parport.h usability... no
checking linux/parport.h presence... no
checking for linux/parport.h... no
checking dev/ppbus/ppi.h usability... no
checking dev/ppbus/ppi.h presence... no
checking for dev/ppbus/ppi.h... no
checking dev/ppbus/ppbconf.h usability... no
checking dev/ppbus/ppbconf.h presence... no
checking for dev/ppbus/ppbconf.h... no
checking cwsid.h usability... no
checking cwsid.h presence... no
checking for cwsid.h... no
checking machine/sysarch.h usability... no
checking machine/sysarch.h presence... no
checking for machine/sysarch.h... no
checking for unistd.h... (cached) yes
checking sys/io.h usability... no
checking sys/io.h presence... no
checking for sys/io.h... no
checking machine/pio.h usability... no
checking machine/pio.h presence... no
checking for machine/pio.h... no
checking machine/cpufunc.h usability... no
checking machine/cpufunc.h presence... no
checking for machine/cpufunc.h... no
checking pci/pci.h usability... no
checking pci/pci.h presence... no
checking for pci/pci.h... no
checking for ioperm... no
checking for inb... no
checking for outb... no
checking for outb_p... no
checking for inb_p... no
checking for inbv... no
checking for outbv... no
checking return type of signal handlers... void
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for u_short... yes
checking for socklen_t... yes
checking for gettimeofday in -lbsd... no
checking for gettimeofday in -lposix... no
checking for gettimeofday... yes
checking for memmove... yes
checking for atexit... yes
checking for strerror... yes
checking for strcasecmp... yes
checking for strncasecmp... yes
checking for dirname... yes
checking for mkstemp... yes
checking for swab... yes
checking for getcwd... yes
checking for getpwuid... yes
checking for random... yes
checking for rewinddir... yes
checking for strtok... yes
checking for strtok_r... yes
checking for strtoul... yes
checking for snprintf... yes
checking for vsnprintf... yes
checking for ltoa... no
checking for ultoa... no
checking for stpcpy... yes
checking for strlcpy... yes
checking for strlwr... no
checking for strrev... no
checking for fseeko... yes
checking for ftello... yes
checking for strdup... yes
checking for usleep... yes
checking for nanosleep... yes
checking readline/readline.h usability... yes
checking readline/readline.h presence... yes
checking for readline/readline.h... yes
checking for readline in -lreadline... yes
checking for rl_readline_name in -lreadline... yes
checking png.h usability... yes
checking png.h presence... yes
checking for png.h... yes
checking for png_sig_cmp in -lpng... yes
checking gif_lib.h usability... yes
checking gif_lib.h presence... yes
checking for gif_lib.h... yes
checking for EGifPutLine in -lungif... no
checking for EGifPutLine in -lgif... yes
checking for jpeglib.h... yes
checking for jpeg_CreateCompress in -ljpeg... yes
checking portaudio.h usability... no
checking portaudio.h presence... no
checking for portaudio.h... no
checking mpg123.h usability... yes
checking mpg123.h presence... yes
checking for mpg123.h... yes
checking for mpg123_init in -lmpg123... yes
checking for OpenCBM support... yes
checking that generated files are newer than configure... done
=== configuring in src/resid (/home/pbulk/build/emulators/vice/work/vice-3.6.1/src/resid)
configure: running /usr/bin/bash ./configure '--prefix=/opt/pkg' --disable-option-checking  '--enable-ethernet' '--enable-lame' '--with-flac' '--with-gif' '--with-jpeg' '--with-mpg123' '--with-png' '--with-vorbis' '--with-zlib' '--disable-pdf-docs' '--enable-html-docs' '--enable-native-gtk3ui' '--enable-desktop-files' '--enable-external-ffmpeg' '--without-pulse' '--without-alsa' '--with-libiconv-prefix=/opt/pkg' '--build=x86_64-sun-solaris2.11' '--host=x86_64-sun-solaris2.11' '--mandir=/opt/pkg/share/man' '--enable-option-checking=yes' 'build_alias=x86_64-sun-solaris2.11' 'host_alias=x86_64-sun-solaris2.11' 'CC=gcc' 'CFLAGS=-pipe -fno-aggressive-loop-optimizations -pipe -fno-aggressive-loop-optimizations -D_FORTIFY_SOURCE=2 -I/opt/pkg/include -I/opt/pkg/include/glib-2.0 -I/opt/pkg/include/gio-unix-2.0 -I/opt/pkg/lib/glib-2.0/include -I/usr/include -I/opt/pkg/include/freetype2 -I/opt/pkg/include/harfbuzz -I/opt/pkg/include/libdrm -I/opt/pkg/include/ffmpeg4 -I/opt/pkg/include/ncurses' 'LDFLAGS=-L/opt/pkg/lib -Wl,-R/opt/pkg/lib -L/usr/lib/amd64 -Wl,-R/usr/lib/amd64 -L/opt/pkg/lib/ffmpeg4 -Wl,-R/opt/pkg/lib/ffmpeg4 -lnsl -lsocket' 'LIBS=' 'CPPFLAGS=-I/opt/pkg/include -I/opt/pkg/include/glib-2.0 -I/opt/pkg/include/gio-unix-2.0 -I/opt/pkg/lib/glib-2.0/include -I/usr/include -I/opt/pkg/include/freetype2 -I/opt/pkg/include/harfbuzz -I/opt/pkg/include/libdrm -I/opt/pkg/include/ffmpeg4 -I/opt/pkg/include/ncurses' 'CXX=g++' 'CXXFLAGS=-pipe -fno-aggressive-loop-optimizations -pipe -fno-aggressive-loop-optimizations -D_FORTIFY_SOURCE=2 -I/opt/pkg/include -I/opt/pkg/include/glib-2.0 -I/opt/pkg/include/gio-unix-2.0 -I/opt/pkg/lib/glib-2.0/include -I/usr/include -I/opt/pkg/include/freetype2 -I/opt/pkg/include/harfbuzz -I/opt/pkg/include/libdrm -I/opt/pkg/include/ffmpeg4 -I/opt/pkg/include/ncurses' 'PKG_CONFIG=/home/pbulk/build/emulators/vice/work/.tools/bin/pkg-config' '--disable-option-checking' '--srcdir=.' --cache-file=
checking for a BSD-compatible install... /opt/pkg/bin/bsdinstall -c -o pbulk -g pbulk
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... ./../../install-sh -c -d
checking for gawk... /opt/pkg/bin/nawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking build system type... x86_64-sun-solaris2.11
checking host system type... x86_64-sun-solaris2.11
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of g++... gcc3
checking if the compiler supports -march=native... yes
checking for ar... ar
checking for x86_64-sun-solaris2.11-ranlib... no
checking for ranlib... ranlib
checking for perl... /opt/pkg/bin/perl
checking how to run the C++ preprocessor... g++ -E
checking for grep that handles long lines and -e... (cached) /usr/xpg4/bin/grep
checking for egrep... (cached) /usr/xpg4/bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking math.h usability... yes
checking math.h presence... yes
checking for math.h... yes
checking size of int... 4
checking for working bool... yes
checking for __builtin_expect... yes
checking for log1p... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating siddefs.h
config.status: executing depfiles commands
=== configuring in src/resid-dtv (/home/pbulk/build/emulators/vice/work/vice-3.6.1/src/resid-dtv)
configure: running /usr/bin/bash ./configure '--prefix=/opt/pkg' --disable-option-checking  '--enable-ethernet' '--enable-lame' '--with-flac' '--with-gif' '--with-jpeg' '--with-mpg123' '--with-png' '--with-vorbis' '--with-zlib' '--disable-pdf-docs' '--enable-html-docs' '--enable-native-gtk3ui' '--enable-desktop-files' '--enable-external-ffmpeg' '--without-pulse' '--without-alsa' '--with-libiconv-prefix=/opt/pkg' '--build=x86_64-sun-solaris2.11' '--host=x86_64-sun-solaris2.11' '--mandir=/opt/pkg/share/man' '--enable-option-checking=yes' 'build_alias=x86_64-sun-solaris2.11' 'host_alias=x86_64-sun-solaris2.11' 'CC=gcc' 'CFLAGS=-pipe -fno-aggressive-loop-optimizations -pipe -fno-aggressive-loop-optimizations -D_FORTIFY_SOURCE=2 -I/opt/pkg/include -I/opt/pkg/include/glib-2.0 -I/opt/pkg/include/gio-unix-2.0 -I/opt/pkg/lib/glib-2.0/include -I/usr/include -I/opt/pkg/include/freetype2 -I/opt/pkg/include/harfbuzz -I/opt/pkg/include/libdrm -I/opt/pkg/include/ffmpeg4 -I/opt/pkg/include/ncurses' 'LDFLAGS=-L/opt/pkg/lib -Wl,-R/opt/pkg/lib -L/usr/lib/amd64 -Wl,-R/usr/lib/amd64 -L/opt/pkg/lib/ffmpeg4 -Wl,-R/opt/pkg/lib/ffmpeg4 -lnsl -lsocket' 'LIBS=' 'CPPFLAGS=-I/opt/pkg/include -I/opt/pkg/include/glib-2.0 -I/opt/pkg/include/gio-unix-2.0 -I/opt/pkg/lib/glib-2.0/include -I/usr/include -I/opt/pkg/include/freetype2 -I/opt/pkg/include/harfbuzz -I/opt/pkg/include/libdrm -I/opt/pkg/include/ffmpeg4 -I/opt/pkg/include/ncurses' 'CXX=g++' 'CXXFLAGS=-pipe -fno-aggressive-loop-optimizations -pipe -fno-aggressive-loop-optimizations -D_FORTIFY_SOURCE=2 -I/opt/pkg/include -I/opt/pkg/include/glib-2.0 -I/opt/pkg/include/gio-unix-2.0 -I/opt/pkg/lib/glib-2.0/include -I/usr/include -I/opt/pkg/include/freetype2 -I/opt/pkg/include/harfbuzz -I/opt/pkg/include/libdrm -I/opt/pkg/include/ffmpeg4 -I/opt/pkg/include/ncurses' 'PKG_CONFIG=/home/pbulk/build/emulators/vice/work/.tools/bin/pkg-config' '--disable-option-checking' '--srcdir=.' --cache-file=
checking for a BSD-compatible install... /opt/pkg/bin/bsdinstall -c -o pbulk -g pbulk
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... ./../../install-sh -c -d
checking for gawk... /opt/pkg/bin/nawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking build system type... x86_64-sun-solaris2.11
checking host system type... x86_64-sun-solaris2.11
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of g++... gcc3
checking for ar... ar
checking for x86_64-sun-solaris2.11-ranlib... no
checking for ranlib... ranlib
checking how to run the C++ preprocessor... g++ -E
checking for grep that handles long lines and -e... (cached) /usr/xpg4/bin/grep
checking for egrep... (cached) /usr/xpg4/bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking size of int... 4
checking for working bool... yes
checking if the mmintrin.h include can be used... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating siddtvdefs.h
config.status: executing depfiles commands
configure: creating ./config.status
config.status: creating Makefile
config.status: creating build/Makefile
config.status: creating build/android/Makefile
config.status: creating build/beos/Makefile
config.status: creating build/mingw/Makefile
config.status: creating build/mingw/frankenvice/Makefile
config.status: creating data/Makefile
config.status: creating data/C128/Makefile
config.status: creating data/C64/Makefile
config.status: creating data/C64DTV/Makefile
config.status: creating data/CBM-II/Makefile
config.status: creating data/DRIVES/Makefile
config.status: creating data/PET/Makefile
config.status: creating data/PLUS4/Makefile
config.status: creating data/SCPU64/Makefile
config.status: creating data/PRINTER/Makefile
config.status: creating data/VIC20/Makefile
config.status: creating data/common/Makefile
config.status: creating data/GLSL/Makefile
config.status: creating doc/Makefile
config.status: creating doc/building/Makefile
config.status: creating doc/html/Makefile
config.status: creating doc/readmes/Makefile
config.status: creating doc/vim/Makefile
config.status: creating doc/vim/ftdetect/Makefile
config.status: creating doc/vim/syntax/Makefile
config.status: creating src/Makefile
config.status: creating src/debug.h
config.status: creating src/arch/Makefile
config.status: creating src/arch/android/Makefile
config.status: creating src/arch/android/AnVICE/AndroidManifest.xml
config.status: creating src/arch/android/AnVICE/Makefile
config.status: creating src/arch/android/AnVICE/.settings/Makefile
config.status: creating src/arch/android/AnVICE/assets-proto/Makefile
config.status: creating src/arch/android/AnVICE/jni/Makefile
config.status: creating src/arch/android/AnVICE/jni/locnet/Makefile
config.status: creating src/arch/android/AnVICE/jni/locnet_x64/Makefile
config.status: creating src/arch/android/AnVICE/jni/locnet_x64dtv/Makefile
config.status: creating src/arch/android/AnVICE/jni/locnet_x64sc/Makefile
config.status: creating src/arch/android/AnVICE/jni/locnet_x128/Makefile
config.status: creating src/arch/android/AnVICE/jni/locnet_xcbm2/Makefile
config.status: creating src/arch/android/AnVICE/jni/locnet_xcbm5x0/Makefile
config.status: creating src/arch/android/AnVICE/jni/locnet_xpet/Makefile
config.status: creating src/arch/android/AnVICE/jni/locnet_xplus4/Makefile
config.status: creating src/arch/android/AnVICE/jni/locnet_xscpu64/Makefile
config.status: creating src/arch/android/AnVICE/jni/locnet_xvic/Makefile
config.status: creating src/arch/android/AnVICE/jni/locnet_al/Makefile
config.status: creating src/arch/android/AnVICE/jni/sdl/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_128_5x0/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_dtv_128_5x0/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_sc/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_sc_128/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_sc_128_2_5x0_pet_4_20/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_sc_dtv/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_sc_dtv_128_2_5x0_pet_4_20/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_sc_dtv_scpu/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_sc_dtv_scpu_128/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_sc_dtv_scpu_128_2_5x0_20/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_sc_dtv_scpu_128_2_5x0_4_20/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_sc_dtv_scpu_128_2_5x0_pet_4/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_sc_dtv_scpu_128_2_5x0_pet_4_20/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_sc_dtv_scpu_128_2_pet_4_20/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_sc_dtv_scpu_128_4_20/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_sc_dtv_scpu_128_20/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_sc_scpu/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_sc_scpu_128/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_sc_scpu_128_2/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_sc_scpu_128_2_5x0_pet_4_20/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_sc_scpu_128_2_pet_4_20/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_sc_scpu_128_2_pet_20/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_sc_scpu_128_4/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_sc_scpu_128_20/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64_sc_scpu_128_5x0_4_20/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64dtv/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64sc/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64sc_scpu/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x64sc_scpu_128_2_pet_4_20/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x128/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_x128_2_5x0_pet/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_xcbm2/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_xcbm2_5x0/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_xcbm2_pet/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_xcbm5x0/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_xpet/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_xplus4/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_xscpu64/Makefile
config.status: creating src/arch/android/AnVICE/jni/vice_xvic/Makefile
config.status: creating src/arch/android/AnVICE/res-proto/Makefile
config.status: creating src/arch/android/AnVICE/res-proto/layout/Makefile
config.status: creating src/arch/android/AnVICE/res-proto/values/Makefile
config.status: creating src/arch/android/AnVICE/src-proto/Makefile
config.status: creating src/arch/android/AnVICE/src-proto/com/Makefile
config.status: creating src/arch/android/AnVICE/src-proto/com/locnet/Makefile
config.status: creating src/arch/android/AnVICE/src-proto/com/locnet/vice/Makefile
config.status: creating src/arch/gtk3/Makefile
config.status: creating src/arch/gtk3/data/Makefile
config.status: creating src/arch/gtk3/data/macos/Makefile
config.status: creating src/arch/gtk3/data/unix/Makefile
config.status: creating src/arch/gtk3/data/win32/Makefile
config.status: creating src/arch/gtk3/novte/Makefile
config.status: creating src/arch/gtk3/widgets/Makefile
config.status: creating src/arch/gtk3/widgets/base/Makefile
config.status: creating src/arch/mingw32-pcap/Makefile
config.status: creating src/arch/mingw32-pcap/wpcap/Makefile
config.status: creating src/arch/mingw32-pcap/wpcap/net/Makefile
config.status: creating src/arch/sdl/Makefile
config.status: creating src/arch/headless/Makefile
config.status: creating src/arch/shared/Makefile
config.status: creating src/buildtools/Makefile
config.status: creating src/c128/Makefile
config.status: creating src/c64/Makefile
config.status: creating src/c64/cart/Makefile
config.status: creating src/c64dtv/Makefile
config.status: creating src/scpu64/Makefile
config.status: creating src/cbm2/Makefile
config.status: creating src/cbm2/cart/Makefile
config.status: creating src/core/Makefile
config.status: creating src/crtc/Makefile
config.status: creating src/datasette/Makefile
config.status: creating src/diag/Makefile
config.status: creating src/diskimage/Makefile
config.status: creating src/drive/Makefile
config.status: creating src/drive/iec/Makefile
config.status: creating src/drive/iec/c64exp/Makefile
config.status: creating src/drive/iec/plus4exp/Makefile
config.status: creating src/drive/iec128dcr/Makefile
config.status: creating src/drive/iecieee/Makefile
config.status: creating src/drive/ieee/Makefile
config.status: creating src/drive/tcbm/Makefile
config.status: creating src/fileio/Makefile
config.status: creating src/fsdevice/Makefile
config.status: creating src/gfxoutputdrv/Makefile
config.status: creating src/hwsiddrv/Makefile
config.status: creating src/hvsc/Makefile
config.status: creating src/iecbus/Makefile
config.status: creating src/imagecontents/Makefile
config.status: creating src/iodrv/Makefile
config.status: creating src/joyport/Makefile
config.status: creating src/joystickdrv/Makefile
config.status: creating src/lib/Makefile
config.status: creating src/lib/p64/Makefile
config.status: creating src/lib/linenoise-ng/Makefile
config.status: creating src/mididrv/Makefile
config.status: creating src/monitor/Makefile
config.status: creating src/parallel/Makefile
config.status: creating src/pet/Makefile
config.status: creating src/plus4/Makefile
config.status: creating src/plus4/cart/Makefile
config.status: creating src/printerdrv/Makefile
config.status: creating src/raster/Makefile
config.status: creating src/rs232drv/Makefile
config.status: creating src/rtc/Makefile
config.status: creating src/samplerdrv/Makefile
config.status: creating src/serial/Makefile
config.status: creating src/sid/Makefile
config.status: creating src/socketdrv/Makefile
config.status: creating src/sounddrv/Makefile
config.status: creating src/tape/Makefile
config.status: creating src/tapeport/Makefile
config.status: creating src/tools/Makefile
config.status: creating src/tools/cartconv/Makefile
config.status: creating src/tools/petcat/Makefile
config.status: creating src/userport/Makefile
config.status: creating src/vdc/Makefile
config.status: creating src/vdrive/Makefile
config.status: creating src/vic20/Makefile
config.status: creating src/vic20/cart/Makefile
config.status: creating src/vicii/Makefile
config.status: creating src/viciisc/Makefile
config.status: creating src/viciivsid/Makefile
config.status: creating src/video/Makefile
config.status: creating src/version.h
config.status: creating src/vice-version.sh
config.status: creating src/config.h
config.status: executing depfiles commands
configure: WARNING: unrecognized options: --with-libiconv-prefix
----------------------------------------------------------------------

configure summary:

Platform canonical : x86_64-sun-solaris2.11
Architecture       : Unix
GUI                : NATIVE GTK3
Multithreaded UI   : yes
OpenMP             : yes

SCREEN/UI
---------
Hardware scaling support       : yes

SOUND
-----
FastSID support              : no  (--with/without-fastsid)
ReSID support                : yes (--with/without-resid)
New 8580 filter support      : yes (--enable/disable-new8580filter)
PortAudio sound input support: no  (--enable/disable-portaudio)
OSS sound support            : no  (--with/without-oss)
ALSA sound support           : no  (--with/without-alsa)
Pulseaudio sound support     : no  (--with/without-pulse)
SDL sound support            : no  (--with/without-sdlsound)
NetBSD/Solaris sound support : yes
MIDI support                 : no  (--enable/disable-midi)
Catweasel MK3 support        : no  (--enable/disable-catweasel)
HardSID support              : no  (--enable/disable-hardsid)
ParSID support               : no  (--enable/disable-parsid)
SSI2001 support              : no  (--enable/disable-ssi2001)
direct I/O access support    : no 
lpt port access              : no 
PCI utils support            : no 
MP3 encoding support         : yes (--enable/disable-lame)
MP3 decoding support         : yes (--with/without-mpg123)
FLAC en/de-coding support    : yes (--with/without-flac)
Vorbis en/de-coding support  : yes (--with/without-vorbis)

SCREENSHOTS
-----------
GIF encoding support : yes (--with/without-gif)
JPEG encoding support: yes (--with/without-jpeg)
PNG encoding support : yes (--with/without-png)

VIDEO RECORDING
---------------
FFMPEG support                : yes (--enable-external-ffmpeg)
FFMPEG swscale support        : yes
Audio resampling library      : swresample

INPUT
-----
Mouse support               : yes
Lightpen support            : yes
Linux style joystick support: no 
BSD style joystick support  : no 
USB joystick support        : no 

MODEM/NETWORK
-------------
RS232 device support             : yes (--enable/disable-rs232)
Network support                  : yes
RS232 network support            : yes
IPv6 network support             : yes (--enable/disable-ipv6)
Network capture/injection support: yes (--enable/disable-ethernet)
libcurl support                  : no  (--with/without-libcurl)

DRIVE
-----
Real device (OpenCBM support)    : yes (--enable/disable-realdevice)
X64 image support                : no  (--enable/disable--x64-image)

LIBS
----
Dynamic linking support           : yes
POSIX 1003.1e capabilities support: no 
zlib support                      : yes (--with/without-zlib)
libieee1284 support               : no 

DOCUMENTATION
-------------
Generate Info/text: yes
Generate PDF      : no (install texinfo)
Generate HTML     : yes

MISC
----
65xx CPU history support   : no  (--enable/disable-cpuhistory)
Debug support              : no  (--enable/disable-debug)
Threading debug support    : no  (--enable/disable-debug-threads
Build old x64 emulator     : no (--enable/--disable-x64)
Install XDG .desktop files : yes
icotool for Windows found  : no

User CPPFLAGS:  -I/opt/pkg/include -I/opt/pkg/include/glib-2.0 -I/opt/pkg/include/gio-unix-2.0 -I/opt/pkg/lib/glib-2.0/include -I/usr/include -I/opt/pkg/include/freetype2 -I/opt/pkg/include/harfbuzz -I/opt/pkg/include/libdrm -I/opt/pkg/include/ffmpeg4 -I/opt/pkg/include/ncurses
VICE_CPPFLAGS:  -I$(top_srcdir)/src/systemheaderoverride -DNDEBUG
User CFLAGS:    -pipe -fno-aggressive-loop-optimizations -pipe -fno-aggressive-loop-optimizations -D_FORTIFY_SOURCE=2 -I/opt/pkg/include -I/opt/pkg/include/glib-2.0 -I/opt/pkg/include/gio-unix-2.0 -I/opt/pkg/lib/glib-2.0/include -I/usr/include -I/opt/pkg/include/freetype2 -I/opt/pkg/include/harfbuzz -I/opt/pkg/include/libdrm -I/opt/pkg/include/ffmpeg4 -I/opt/pkg/include/ncurses
VICE CFLAGS:    -g -O3 -W -Wall -Wextra -Wformat -Wformat-signedness -Wshadow -Wpointer-arith -Wmissing-prototypes -Wstrict-prototypes -Wuninitialized -Wunreachable-code -Werror=implicit-function-declaration -Wfatal-errors -Wdiscarded-qualifiers -Wno-sign-compare -Wno-missing-field-initializers -Wno-ignored-qualifiers -Wno-unused-parameter -fopenmp -I/opt/pkg/include/glib-2.0 -I/opt/pkg/lib/glib-2.0/include -I/opt/pkg/include  -I/opt/pkg/include/gtk-3.0 -I/opt/pkg/include/pango-1.0 -I/opt/pkg/include -I/opt/pkg/include/glib-2.0 -I/opt/pkg/lib/glib-2.0/include -I/opt/pkg/include/harfbuzz -I/opt/pkg/include/freetype2 -I/opt/pkg/include/libpng16 -I/opt/pkg/include/fribidi -I/opt/pkg/include/cairo -I/opt/pkg/include/pixman-1 -D_REENTRANT -D_REENTRANT -D_REENTRANT -D_REENTRANT -I/opt/pkg/include/gdk-pixbuf-2.0 -D_REENTRANT -I/opt/pkg/include/gio-unix-2.0 -D_REENTRANT -I/opt/pkg/include/libdrm -I/opt/pkg/include/atk-1.0 -I/opt/pkg/include/at-spi2-atk/2.0 -I/opt/pkg/include/dbus-1.0 -I/opt/pkg/lib/dbus-1.0/include -I/opt/pkg/include/at-spi-2.0 -D_REENTRANT -D_REENTRANT -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -D_REENTRANT -pthread  -pthread
User CXXFLAGS:  -pipe -fno-aggressive-loop-optimizations -pipe -fno-aggressive-loop-optimizations -D_FORTIFY_SOURCE=2 -I/opt/pkg/include -I/opt/pkg/include/glib-2.0 -I/opt/pkg/include/gio-unix-2.0 -I/opt/pkg/lib/glib-2.0/include -I/usr/include -I/opt/pkg/include/freetype2 -I/opt/pkg/include/harfbuzz -I/opt/pkg/include/libdrm -I/opt/pkg/include/ffmpeg4 -I/opt/pkg/include/ncurses
VICE CXXFLAGS:  -g -O3 -Wall -Wformat -Wshadow -Wpointer-arith -Wuninitialized -Wunreachable-code -Wno-unused-parameter -Wfatal-errors -fopenmp -I/opt/pkg/include/glib-2.0 -I/opt/pkg/lib/glib-2.0/include -I/opt/pkg/include  -I/opt/pkg/include/gtk-3.0 -I/opt/pkg/include/pango-1.0 -I/opt/pkg/include -I/opt/pkg/include/glib-2.0 -I/opt/pkg/lib/glib-2.0/include -I/opt/pkg/include/harfbuzz -I/opt/pkg/include/freetype2 -I/opt/pkg/include/libpng16 -I/opt/pkg/include/fribidi -I/opt/pkg/include/cairo -I/opt/pkg/include/pixman-1 -D_REENTRANT -D_REENTRANT -D_REENTRANT -D_REENTRANT -I/opt/pkg/include/gdk-pixbuf-2.0 -D_REENTRANT -I/opt/pkg/include/gio-unix-2.0 -D_REENTRANT -I/opt/pkg/include/libdrm -I/opt/pkg/include/atk-1.0 -I/opt/pkg/include/at-spi2-atk/2.0 -I/opt/pkg/include/dbus-1.0 -I/opt/pkg/lib/dbus-1.0/include -I/opt/pkg/include/at-spi-2.0 -D_REENTRANT -D_REENTRANT -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -D_REENTRANT -pthread  -pthread
VTE_CXXFLAGS:    -Wno-address-of-packed-member -Wno-char-subscripts -Wno-format-signedness -Wno-c99-designator -Wno-shorten-64-to-32 -Wno-nonnull-compare
MONITOR_CFLAGS:  -Wno-unused-label -Wno-unreachable-code -Wno-misleading-indentation
User LDFLAGS:   -L/opt/pkg/lib -Wl,-R/opt/pkg/lib -L/usr/lib/amd64 -Wl,-R/usr/lib/amd64 -L/opt/pkg/lib/ffmpeg4 -Wl,-R/opt/pkg/lib/ffmpeg4 -lnsl -lsocket
VICE LDFLAGS:    -fopenmp -pthread
----------------------------------------------------------------------
=> Substituting "prefix" in doc/vice.texi