+ case "${usergroup_phase}" in + local run_cmd + run_cmd=run_su + shift + run_su /opt/local/bin/bmake configure BATCH=1 DEPENDS_TARGET=/nonexistent PYTHON_VERSION_REQD=310 WRKLOG=/tmp/bulklog/gnumeric-1.12.48nb8/work.log + su pbulk -c '"$@"' make /opt/local/bin/bmake configure BATCH=1 DEPENDS_TARGET=/nonexistent PYTHON_VERSION_REQD=310 WRKLOG=/tmp/bulklog/gnumeric-1.12.48nb8/work.log => Bootstrap dependency digest>=20211023: found digest-20220214 => Checksum BLAKE2s OK for gnumeric-1.12.48.tar.xz => Checksum SHA512 OK for gnumeric-1.12.48.tar.xz ===> Installing dependencies for gnumeric-1.12.48nb8 ========================================================================== The supported build options for gnumeric are: psiconv You can select which build options to use by setting PKG_DEFAULT_OPTIONS or the following variable. Its current value is shown: PKG_OPTIONS.gnumeric (not defined) ========================================================================== ========================================================================== The following variables will affect the build process of this package, gnumeric-1.12.48nb8. Their current value is shown below: * JPEG_DEFAULT = libjpeg-turbo * PYTHON_VERSION_DEFAULT = 310 Based on these variables, the following variables have been set: * JPEGBASE (defined, but empty) * JPEG_TYPE = libjpeg-turbo * PYPACKAGE = python310 You may want to abort the process now with CTRL-C and change the value of variables in the first group before continuing. Be sure to run `/opt/local/bin/bmake clean' after the changes. ========================================================================== => Tool dependency glib2-tools-[0-9]*: found glib2-tools-2.74.3 => Tool dependency libtool-base>=2.4.2nb9: found libtool-base-2.4.7nb1 => Tool dependency mktools-[0-9]*: found mktools-20220614 => Tool dependency intltool>=0.40.0: found intltool-0.51.0nb7 => Tool dependency gmake>=3.81: found gmake-4.4 => Tool dependency itstool-[0-9]*: found itstool-2.0.7nb1 => Tool dependency gettext-tools>=0.15: found gettext-tools-0.21nb3 => Tool dependency pkgconf-[0-9]*: found pkgconf-1.8.0 => Tool dependency bison>=1.0: found bison-3.8.2nb1 => Tool dependency cwrappers>=20150314: found cwrappers-20220403 => Tool dependency checkperms>=1.1: found checkperms-1.12 => Build dependency py-gobject3-common>=3.10.2: found py-gobject3-common-3.42.0 => Build dependency xorgproto>=2016.1: found xorgproto-2022.2 => Build dependency xcb-proto>=1.4: found xcb-proto-1.15.2nb1 => Build dependency gcc12>=12.2.0: found gcc12-12.2.0 => Full dependency py310-gobject3-[0-9]*: found py310-gobject3-3.42.0 => Full dependency perl>=5.36.0<5.38.0: found perl-5.36.0 => Full dependency glib2>=2.70.2: found glib2-2.74.3 => Full dependency gettext-lib>=0.18: found gettext-lib-0.21 => Full dependency zlib>=1.2.3: found zlib-1.2.13 => Full dependency libgsf>=1.14.47nb6: found libgsf-1.14.47nb6 => Full dependency libxml2>=2.9.14nb1: found libxml2-2.9.14nb1 => Full dependency hicolor-icon-theme>=0.9nb1: found hicolor-icon-theme-0.17nb1 => Full dependency goffice0.10>=0.10.48nb5: found goffice0.10-0.10.48nb5 => Full dependency gtk3+>=3.24.34nb2: found gtk3+-3.24.35 => Full dependency python310>=3.10: found python310-3.10.9 => Full dependency gcc12-libs>=12.2.0: found gcc12-libs-12.2.0 ===> Overriding tools for gnumeric-1.12.48nb8 ===> Extracting for gnumeric-1.12.48nb8 ===> Patching for gnumeric-1.12.48nb8 => Applying pkgsrc patches for gnumeric-1.12.48nb8 => Verifying /data/jenkins/workspace/pkgsrc-trunk-x86_64/math/gnumeric112/patches/patch-aa => Applying pkgsrc patch /data/jenkins/workspace/pkgsrc-trunk-x86_64/math/gnumeric112/patches/patch-aa Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |$NetBSD: patch-aa,v 1.3 2015/08/05 21:34:17 he Exp $ | |Make bit_max be computed dynamically. | |--- plugins/fn-numtheory/numtheory.c.orig 2013-04-17 23:57:13.000000000 +0000 |+++ plugins/fn-numtheory/numtheory.c -------------------------- Patching file plugins/fn-numtheory/numtheory.c using Plan A... Hunk #1 succeeded at 37 (offset -1 lines). done => Verifying /data/jenkins/workspace/pkgsrc-trunk-x86_64/math/gnumeric112/patches/patch-ab => Applying pkgsrc patch /data/jenkins/workspace/pkgsrc-trunk-x86_64/math/gnumeric112/patches/patch-ab Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |$NetBSD: patch-ab,v 1.3 2015/08/05 21:34:17 he Exp $ | |Adapt to our build layout. | |--- plugins/excelplugins/Makefile.in.orig 2013-08-16 21:42:10.000000000 +0000 |+++ plugins/excelplugins/Makefile.in -------------------------- Patching file plugins/excelplugins/Makefile.in using Plan A... Hunk #1 succeeded at 137 (offset 44 lines). Hunk #2 succeeded at 420 (offset 43 lines). done ===> Creating toolchain wrappers for gnumeric-1.12.48nb8 ===> Configuring for gnumeric-1.12.48nb8 => Modifying GNU configure scripts to avoid --recheck => Replacing config-guess with pkgsrc versions => Replacing config-sub with pkgsrc versions => Replacing install-sh with pkgsrc version => Replacing Perl interpreter in plugins/perl-func/perl_func.pl test/*.pl. => Adding run-time search paths to pkg-config files. => Fixing locale directory references. => Checking for portability problems in extracted files WARNING: [check-portability.awk] => Found $RANDOM: WARNING: [check-portability.awk] configure:3990: INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)_it_tmp_dir=tmp.intltool.$$RANDOM && mkdir $$_it_tmp_dir && LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u $$_it_tmp_dir $< $@ && rmdir $$_it_tmp_dir' Explanation: =========================================================================== The variable $RANDOM is not required for a POSIX-conforming shell, and many implementations of /bin/sh do not support it. It should therefore not be used in shell programs that are meant to be portable across a large number of POSIX-like systems. =========================================================================== configure: WARNING: unrecognized options: --with-libiconv-prefix checking for a BSD-compatible install... /opt/local/bin/bsdinstall -c -o pbulk -g pbulk checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./install-sh -c -d checking for gawk... /usr/bin/nawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether to enable maintainer-specific portions of Makefiles... yes checking whether make supports nested variables... (cached) yes checking pkg-config is at least version 0.9.0... yes checking for gtk-doc... no configure: WARNING: You will not be able to create source packages with 'make dist' because gtk-doc is not found. checking for gtkdoc-check... no checking for gtkdoc-check... no checking for gtkdoc-rebase... no checking for gtkdoc-mkpdf... no checking whether to build gtk-doc documentation... no checking for GTKDOC_DEPS... yes checking whether NLS is requested... yes checking for intltool >= 0.35.0... 0.51.0 found checking for intltool-update... /home/pbulk/build/math/gnumeric112/work/.tools/bin/intltool-update checking for intltool-merge... /home/pbulk/build/math/gnumeric112/work/.tools/bin/intltool-merge checking for intltool-extract... /home/pbulk/build/math/gnumeric112/work/.tools/bin/intltool-extract checking for xgettext... /opt/local/bin/xgettext checking for msgmerge... /opt/local/bin/msgmerge checking for msgfmt... /home/pbulk/build/math/gnumeric112/work/.tools/bin/msgfmt checking for gmsgfmt... /home/pbulk/build/math/gnumeric112/work/.tools/bin/msgfmt checking for perl... /opt/local/bin/perl checking for perl >= 5.8.1... 5.36.0 checking for XML::Parser... ok checking build system type... x86_64-sun-solaris2.11 checking host system type... x86_64-sun-solaris2.11 checking whether make supports the include directive... yes (GNU style) checking for x86_64-sun-solaris2.11-gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... gcc3 checking for library containing strerror... none required checking for x86_64-sun-solaris2.11-gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking dependency style of gcc... (cached) gcc3 checking for gcc option to accept ISO C99... none needed checking for bison... /opt/local/bin/bison -y checking whether ln -s works... yes checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... (cached) /usr/xpg4/bin/grep checking for egrep... (cached) /usr/xpg4/bin/grep -E checking for ANSI C header files... yes checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for fgrep... /usr/xpg4/bin/grep -F checking for ld used by gcc... /bin/ld checking if the linker (/bin/ld) is GNU ld... no checking for BSD- or MS-compatible name lister (nm)... /opt/local/bin/nm -B checking the name lister (/opt/local/bin/nm -B) interface... BSD nm checking the maximum length of command line arguments... 786240 checking how to convert x86_64-sun-solaris2.11 file names to x86_64-sun-solaris2.11 format... func_convert_file_noop checking how to convert x86_64-sun-solaris2.11 file names to toolchain format... func_convert_file_noop checking for /bin/ld option to reload object files... -r checking for x86_64-sun-solaris2.11-objdump... no checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for x86_64-sun-solaris2.11-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for x86_64-sun-solaris2.11-ar... no checking for ar... ar checking for archiver @FILE support... @ checking for x86_64-sun-solaris2.11-strip... no checking for strip... strip checking for x86_64-sun-solaris2.11-ranlib... no checking for ranlib... ranlib checking command to parse /opt/local/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for x86_64-sun-solaris2.11-mt... no checking for mt... mt checking if mt is a manifest tool... no checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... rm: conftest*: No such file or directory yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/bin/ld -64) supports shared libraries... yes checking whether -lc should be explicitly linked in... rm: conftest*: No such file or directory no checking dynamic linker characteristics... solaris2.11 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... no checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking zlib.h usability... yes checking zlib.h presence... yes checking for zlib.h... yes checking for gzread in -lz... yes checking pkg-config is at least version 0.18... yes checking for GTK... yes checking for GTK... yes checking for LIBSPREADSHEET... yes checking for GNUMERIC... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking for LC_MESSAGES... yes checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyCurrent... no checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking for ngettext in libc... yes checking for dgettext in libc... yes checking for bind_textdomain_codeset... yes checking for msgfmt... (cached) /home/pbulk/build/math/gnumeric112/work/.tools/bin/msgfmt checking for dcgettext... yes checking if msgfmt accepts -c... yes checking for gmsgfmt... (cached) /home/pbulk/build/math/gnumeric112/work/.tools/bin/msgfmt checking for xgettext... (cached) /opt/local/bin/xgettext checking for glib-genmarshal... glib-genmarshal checking for gdk-pixbuf-csource... gdk-pixbuf-csource checking for GDA... no checking whether fdopen is declared... yes checking whether struct timeval is available... yes checking whether M_PI is available... yes checking for PARADOX... no checking for mkfifo... yes checking for sys/wait.h that is POSIX.1 compatible... yes checking for uname... yes checking for setenv... yes checking for putenv... yes checking for bind_textdomain_codeset... (cached) yes checking langinfo.h usability... yes checking langinfo.h presence... yes checking for langinfo.h... yes checking sys/resource.h usability... yes checking sys/resource.h presence... yes checking for sys/resource.h... yes checking fpu_control.h usability... no checking fpu_control.h presence... no checking for fpu_control.h... no checking for gtk_cell_renderer_text_get_background_set... no checking for gtk_cell_renderer_text_get_foreground_set... no checking for gtk_cell_renderer_text_get_editable... no checking for gtk_entry_set_editing_cancelled... no checking for gtk_icon_theme_add_resource_path... yes checking for g_ptr_array_insert... yes checking for OO_NS_LOCALC_EXT... yes checking for lgamma_r... no checking for lgamma_r in -lm... yes checking for lgamma... yes checking cos is reliable... yes checking whether gcc understands -Werror=unknown-warning-option... no checking whether gcc understands -Wall... yes checking whether gcc understands -Werror=init-self... yes checking whether gcc understands -Werror=missing-include-dirs... yes checking whether gcc understands -Wsign-compare... yes checking whether gcc understands -Werror=pointer-arith... yes checking whether gcc understands -Wchar-subscripts... yes checking whether gcc understands -Wwrite-strings... yes checking whether gcc understands -Wdeclaration-after-statement... yes checking whether gcc understands -Wnested-externs... yes checking whether gcc understands -Wmissing-noreturn... yes checking whether gcc understands -Werror=missing-prototypes... yes checking whether gcc understands -Werror=nested-externs... yes checking whether gcc understands -Werror=implicit-function-declaration... yes checking whether gcc understands -Wmissing-declarations... yes checking whether gcc understands -Wno-pointer-sign... yes checking whether gcc understands -Werror=format-security... yes checking whether gcc understands -Wbitwise... no checking whether gcc understands -Wcast-to-as... no checking whether gcc understands -Wdefault-bitfield-sign... no checking whether gcc understands -Wdo-while... no checking whether gcc understands -Wparen-string... no checking whether gcc understands -Wptr-subtraction-blows... no checking whether gcc understands -Wreturn-void... no checking whether gcc understands -Wtypesign... no checking whether gcc understands -Wstrict-prototypes... yes checking whether gcc understands -Wno-error=format-nonliteral... yes checking if we must prototype lgamma_r ourselves... no checking for g_settings_new in -lgio-2.0... yes checking pkg-config is at least version 0.16... yes checking for perl... /opt/local/bin/perl checking ======== for perl ExtUtils::Embed module... yes checking Checking for perl compiler, linker, libraries and headers... yes checking for python3... /opt/local/bin/python3.10 checking for python module gi... yes checking ======== for python = 3.x... yes :1: DeprecationWarning: The distutils package is deprecated and slated for removal in Python 3.12. Use setuptools or check PEP 632 for potential alternatives :1: DeprecationWarning: The distutils.sysconfig module is deprecated, use sysconfig instead checking ======== Look for /opt/local/include/python3.10/Python.h... yes checking for PYGOBJECT... yes :1: DeprecationWarning: The distutils package is deprecated and slated for removal in Python 3.12. Use setuptools or check PEP 632 for potential alternatives :1: DeprecationWarning: The distutils.sysconfig module is deprecated, use sysconfig instead checking for itstool... /home/pbulk/build/math/gnumeric112/work/.tools/bin/itstool checking for xmllint... xmllint checking for gobject-introspection... no (disabled, use --enable-introspection to enable) checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating gnumeric.spec config.status: creating Makefile config.status: creating libspreadsheet.pc config.status: creating icons/Makefile config.status: creating icons/16x16/Makefile config.status: creating icons/16x16/actions/Makefile config.status: creating icons/16x16/apps/Makefile config.status: creating icons/22x22/Makefile config.status: creating icons/22x22/actions/Makefile config.status: creating icons/22x22/apps/Makefile config.status: creating icons/24x24/Makefile config.status: creating icons/24x24/actions/Makefile config.status: creating icons/24x24/apps/Makefile config.status: creating icons/32x32/Makefile config.status: creating icons/32x32/actions/Makefile config.status: creating icons/32x32/apps/Makefile config.status: creating icons/48x48/Makefile config.status: creating icons/48x48/actions/Makefile config.status: creating icons/48x48/apps/Makefile config.status: creating icons/256x256/Makefile config.status: creating icons/256x256/apps/Makefile config.status: creating introspection/Makefile config.status: creating src/Makefile config.status: creating doc/Makefile config.status: creating plugins/Makefile config.status: creating plugins/fn-christian-date/Makefile config.status: creating plugins/fn-complex/Makefile config.status: creating plugins/fn-database/Makefile config.status: creating plugins/fn-date/Makefile config.status: creating plugins/fn-derivatives/Makefile config.status: creating plugins/fn-eng/Makefile config.status: creating plugins/fn-erlang/Makefile config.status: creating plugins/fn-financial/Makefile config.status: creating plugins/fn-hebrew-date/Makefile config.status: creating plugins/fn-info/Makefile config.status: creating plugins/fn-logical/Makefile config.status: creating plugins/fn-lookup/Makefile config.status: creating plugins/fn-math/Makefile config.status: creating plugins/fn-numtheory/Makefile config.status: creating plugins/fn-r/Makefile config.status: creating plugins/fn-stat/Makefile config.status: creating plugins/fn-string/Makefile config.status: creating plugins/fn-random/Makefile config.status: creating plugins/fn-tsa/Makefile config.status: creating plugins/applix/Makefile config.status: creating plugins/dif/Makefile config.status: creating plugins/excel/Makefile config.status: creating plugins/excelplugins/Makefile config.status: creating plugins/gda/Makefile config.status: creating plugins/gnome-db/Makefile config.status: creating plugins/gnome-glossary/Makefile config.status: creating plugins/html/Makefile config.status: creating plugins/lotus-123/Makefile config.status: creating plugins/lpsolve/Makefile config.status: creating plugins/nlsolve/Makefile config.status: creating plugins/glpk/Makefile config.status: creating plugins/mps/Makefile config.status: creating plugins/oleo/Makefile config.status: creating plugins/openoffice/Makefile config.status: creating plugins/paradox/Makefile config.status: creating plugins/perl-func/Makefile config.status: creating plugins/perl-loader/Makefile config.status: creating plugins/plan-perfect/Makefile config.status: creating plugins/psiconv/Makefile config.status: creating plugins/py-func/Makefile config.status: creating plugins/python-loader/Makefile config.status: creating plugins/qpro/Makefile config.status: creating plugins/sample_datasource/Makefile config.status: creating plugins/sc/Makefile config.status: creating plugins/sylk/Makefile config.status: creating plugins/uihello/Makefile config.status: creating plugins/xbase/Makefile config.status: creating po/Makefile.in config.status: creating po-functions/Makefile.in config.status: creating schemas/Makefile config.status: creating schemas/org.gnome.gnumeric.gschema.xml.in config.status: creating schemas/org.gnome.gnumeric.dialogs.gschema.xml.in config.status: creating schemas/org.gnome.gnumeric.plugin.gschema.xml.in config.status: creating templates/Makefile config.status: creating templates/english/Makefile config.status: creating templates/autoformat/Makefile config.status: creating test/Makefile config.status: creating tools/Makefile config.status: creating tools/win32/Makefile config.status: creating tools/win32/moduleset config.status: creating tools/win32/gnumeric.nsi config.status: creating component/Makefile config.status: creating gnumeric-config.h config.status: creating gnumeric-features.h config.status: executing depfiles commands config.status: executing libtool commands rm: libtoolT: No such file or directory config.status: executing default-1 commands config.status: executing po-functions/Makefile commands config.status: executing po/stamp-it commands config.status: executing po-functions/stamp-it commands configure: WARNING: unrecognized options: --with-libiconv-prefix Configuration: Source code location: . Compiler: gcc Compiler flags: -pipe -O2 -msave-args -fno-aggressive-loop-optimizations -D_FORTIFY_SOURCE=2 -I/opt/local/include/glib-2.0 -I/opt/local/include/gio-unix-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/usr/include -I/opt/local/include/freetype2 -I/opt/local/include/harfbuzz -I/opt/local/include/libdrm -I/opt/local/include/python3.10 -DGDK_DISABLE_DEPRECATION_WARNINGS -DGTK_DISABLE_DEPRECATION_WARNINGS -Wall -Werror=init-self -Werror=missing-include-dirs -Wsign-compare -Werror=pointer-arith -Wchar-subscripts -Wwrite-strings -Wdeclaration-after-statement -Wnested-externs -Wmissing-noreturn -Werror=missing-prototypes -Werror=nested-externs -Werror=implicit-function-declaration -Wmissing-declarations -Wno-pointer-sign -Werror=format-security -Wstrict-prototypes -Wno-error=format-nonliteral Floating point type: double UI: Gtk Perl plugin support: yes (using /opt/local/bin/perl) Python plugin support: yes (using /opt/local/bin/python3.10) Introspection python support: No, introspection disabled GDA support: NO. libgda problem GNOME-DB support: no Psiconv support: no PDF documentation: No, not requested. => Overriding intltool. => Modifying libtool scripts to use pkgsrc libtool => Modifying libtool scripts to use pkgsrc depcomp