+ case "${usergroup_phase}" in
+ local run_cmd
+ run_cmd=run_su
+ shift
+ run_su /usr/pkg/bin/bmake configure BATCH=1 DEPENDS_TARGET=/nonexistent WRKLOG=/tmp/bulklog/netatalk22-2.3.2nb2/work.log
+ su pbulk -c '"$@"' make /usr/pkg/bin/bmake configure BATCH=1 DEPENDS_TARGET=/nonexistent WRKLOG=/tmp/bulklog/netatalk22-2.3.2nb2/work.log
=> Bootstrap dependency digest>=20211023: found digest-20220214
=> Checksum BLAKE2s OK for netatalk-2.3.2.tar.xz
=> Checksum SHA512 OK for netatalk-2.3.2.tar.xz
===> Installing dependencies for netatalk22-2.3.2nb2
==========================================================================
The supported build options for netatalk22 are:

	cups debug dnssd kerberos ldap pam slp

The currently selected options are:

	ldap

You can select which build options to use by setting PKG_DEFAULT_OPTIONS
or the following variable.  Its current value is shown:

	PKG_OPTIONS.netatalk (not defined)

==========================================================================
==========================================================================
The following variables will affect the build process of this package,
netatalk22-2.3.2nb2.  Their current value is shown below:

        * BDB185_DEFAULT = db4
        * BDB_DEFAULT = db4
        * SSLBASE (defined)
        * SSLCERTBUNDLE (not defined)
        * SSLCERTS = /usr/pkg/etc/openssl/certs
        * SSLDIR = /usr/pkg/etc/openssl
        * SSLKEYS = /usr/pkg/etc/openssl/private
        * VARBASE = /var

Based on these variables, the following variables have been set:

        * BDBBASE (defined, but empty)
        * BDB_LIBS = -ldb4
        * BDB_TYPE = db4

You may want to abort the process now with CTRL-C and change the value
of variables in the first group before continuing.  Be sure to run
`/usr/pkg/bin/bmake clean' after the changes.
==========================================================================
=> Tool dependency libtool-base>=2.4.2nb9: found libtool-base-2.4.7nb1
=> Tool dependency mktools-[0-9]*: found mktools-20220614
=> Tool dependency nbpatch-[0-9]*: found nbpatch-20151107
=> Tool dependency pkgconf-[0-9]*: found pkgconf-2.2.0nb1
=> Tool dependency cwrappers>=20150314: found cwrappers-20220403
=> Tool dependency checkperms>=1.1: found checkperms-1.12
=> Full dependency perl>=5.0: found perl-5.38.2
=> Full dependency openldap-client>=2.6.6nb1: found openldap-client-2.6.8
=> Full dependency openssl>=3: found openssl-3.3.1
=> Full dependency libgcrypt>=1.6.0: found libgcrypt-1.10.3
=> Full dependency tcp_wrappers>=7.6.1nb3: found tcp_wrappers-7.6.4
=> Full dependency db4>=4.8.30: found db4-4.8.30nb1
===> Overriding tools for netatalk22-2.3.2nb2
===> Extracting for netatalk22-2.3.2nb2
===> Patching for netatalk22-2.3.2nb2
=> Applying pkgsrc patches for netatalk22-2.3.2nb2
=> Verifying /data/jenkins/workspace/pkgsrc-el7-trunk-x86_64/net/netatalk22/patches/patch-config_Makefile.in
=> Applying pkgsrc patch /data/jenkins/workspace/pkgsrc-el7-trunk-x86_64/net/netatalk22/patches/patch-config_Makefile.in
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|$NetBSD: patch-config_Makefile.in,v 1.4 2024/01/21 20:00:42 hauke Exp $
|
|Install config files to examples/netatalk, and leave installation to
|the pkginstall framerwork.
|
|Renamed from patch-ah
|
|--- config/Makefile.in.orig	2023-12-28 12:14:55.000000000 +0000
|+++ config/Makefile.in
--------------------------
Patching file config/Makefile.in using Plan A...
Hunk #1 succeeded at 754 (offset 3 lines).
done
=> Verifying /data/jenkins/workspace/pkgsrc-el7-trunk-x86_64/net/netatalk22/patches/patch-configure
=> Applying pkgsrc patch /data/jenkins/workspace/pkgsrc-el7-trunk-x86_64/net/netatalk22/patches/patch-configure
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|$NetBSD: patch-configure,v 1.4 2023/01/10 22:07:33 hauke Exp $
|
|Fix build on SunOS by disabling the isainfo bitness check 
|
|--- configure.orig	2023-01-10 08:57:35.000000000 +0000
|+++ configure
--------------------------
Patching file configure using Plan A...
Hunk #1 succeeded at 18916 (offset -415 lines).
done
===> Creating toolchain wrappers for netatalk22-2.3.2nb2
===> Configuring for netatalk22-2.3.2nb2
=> Fixing hardcoded paths.
=> Modifying GNU configure scripts to avoid --recheck
=> Replacing config-guess with pkgsrc versions
=> Replacing config-sub with pkgsrc versions
=> Replacing install-sh with pkgsrc version
=> Checking for portability problems in extracted files
configure: WARNING: unrecognized options: --enable-timelord
checking build system type... x86_64-redhat-linux-gnu
checking host system type... x86_64-redhat-linux-gnu
checking for a BSD-compatible install... /bin/install -c -o pbulk -g pbulk
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /home/pbulk/build/net/netatalk22/work/.tools/bin/mkdir -p
checking for gawk... /bin/gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for gawk... (cached) /bin/gawk
checking for x86_64-redhat-linux-gcc... cc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether cc accepts -g... yes
checking for cc option to enable C11 features... -std=gnu11
checking whether cc -std=gnu11 understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of cc -std=gnu11... gcc3
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for make... (cached) /bin/grep
checking for egrep... (cached) /bin/egrep
checking for fgrep... /bin/grep -F
checking for ld used by cc -std=gnu11... /home/pbulk/build/net/netatalk22/work/.cwrapper/bin/ld
checking if the linker (/home/pbulk/build/net/netatalk22/work/.cwrapper/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B
checking the name lister (/bin/nm -B) interface... BSD nm
checking the maximum length of command line arguments... (cached) 2097152
checking how to convert x86_64-redhat-linux-gnu file names to x86_64-redhat-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-redhat-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /home/pbulk/build/net/netatalk22/work/.cwrapper/bin/ld option to reload object files... -r
checking for x86_64-redhat-linux-file... no
checking for file... file
checking for x86_64-redhat-linux-objdump... no
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for x86_64-redhat-linux-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for x86_64-redhat-linux-ar... no
checking for ar... ar
checking for archiver @FILE support... @
checking for x86_64-redhat-linux-strip... no
checking for strip... strip
checking for x86_64-redhat-linux-ranlib... no
checking for ranlib... ranlib
checking command to parse /bin/nm -B output from cc -std=gnu11 object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for x86_64-redhat-linux-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for sys/param.h... yes
checking for utime.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if cc -std=gnu11 supports -fno-rtti -fno-exceptions... no
checking for cc -std=gnu11 option to produce PIC... -fPIC -DPIC
checking if cc -std=gnu11 PIC flag -fPIC -DPIC works... yes
checking if cc -std=gnu11 static flag -static works... no
checking if cc -std=gnu11 supports -c -o file.o... /bin/rm: cannot remove 'conftest*': No such file or directory
yes
checking if cc -std=gnu11 supports -c -o file.o... (cached) yes
checking whether the cc -std=gnu11 linker (/home/pbulk/build/net/netatalk22/work/.cwrapper/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... /bin/rm: cannot remove 'conftest*': No such file or directory
no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... yes
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for mt... /usr/pkg/bin/perl
checking for mt... (cached) /bin/grep
checking for ps... /bin/ps
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for sys/wait.h that is POSIX.1 compatible... yes
checking for fcntl.h... yes
checking for limits.h... yes
checking for stdint.h... (cached) yes
checking for strings.h... (cached) yes
checking for time.h... yes
checking for sys/param.h... (cached) yes
checking for fcntl.h... (cached) yes
checking for sys/file.h... yes
checking for sys/ioctl.h... yes
checking for sys/time.h... yes
checking for sys/mnttab.h... no
checking for sys/statvfs.h... yes
checking for sys/stat.h... (cached) yes
checking for sys/vfs.h... yes
checking for mntent.h... yes
checking for syslog.h... yes
checking for unistd.h... (cached) yes
checking for termios.h... yes
checking for termios.h... (cached) yes
checking for netdb.h... yes
checking for sgtty.h... yes
checking for ufs/quota.h... no
checking for mount.h... no
checking for statfs.h... no
checking for sys/types.h... (cached) yes
checking for dlfcn.h... (cached) yes
checking for errno.h... yes
checking for sys/uio.h... yes
checking for langinfo.h... yes
checking for locale.h... yes
checking for sys/filio.h... no
checking for sys/mount.h... yes
checking for an ANSI C-conforming const... yes
checking how to run the C preprocessor... cc -std=gnu11 -E
checking for uid_t in sys/types.h... yes
checking for inline... inline
checking for mode_t... yes
checking for off_t... yes
checking for pid_t... yes
checking for size_t... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking for cc -std=gnu11 options needed to detect all undeclared functions... none needed
checking for library containing dlopen... -ldl
checking for dlerror... yes
checking for shl_load... (cached) no
checking for shl_load in -ldld... (cached) no
checking for dld_link in -ldld... no
checking for dlopen... (cached) no
checking for dlsym... no
checking for dlclose... no
checking for _ prefix in compiled symbols... no
checking what extension is used for runtime loadable modules... .so
checking type of array argument to getgroups... gid_t
checking whether cc -std=gnu11 needs -traditional... no
checking for working memcmp... yes
checking for sys/mkdev.h... no
checking for sys/sysmacros.h... yes
checking for getpagesize... yes
checking for working mmap... yes
checking return type of signal handlers... void
checking whether utime accepts a null argument... yes
checking for getcwd... yes
checking for gethostname... yes
checking for gettimeofday... yes
checking for getusershell... yes
checking for mkdir... yes
checking for rmdir... yes
checking for select... yes
checking for socket... yes
checking for strdup... yes
checking for strcasestr... yes
checking for strstr... yes
checking for strtoul... yes
checking for strchr... yes
checking for memcpy... yes
checking for backtrace_symbols... yes
checking for setlocale... yes
checking for nl_langinfo... yes
checking for strlcpy... no
checking for strlcat... no
checking for setlinebuf... yes
checking for dirfd... yes
checking for pselect... yes
checking for access... yes
checking for pread... yes
checking for pwrite... yes
checking for waitpid... yes
checking for getcwd... (cached) yes
checking for strdup... (cached) yes
checking for strndup... yes
checking for strnlen... yes
checking for strtoul... (cached) yes
checking for strerror... yes
checking for chown... yes
checking for fchown... yes
checking for chmod... yes
checking for fchmod... yes
checking for chroot... yes
checking for link... yes
checking for mknod... yes
checking for mknod64... no
checking for openat... yes
checking for renameat... yes
checking for fstatat... yes
checking for unlinkat... yes
checking for struct tm.tm_gmtoff... yes
checking for gethostbyname... yes
checking for connect... yes
checking for library containing pthread_sigmask... -lpthread
checking for snprintf... yes
checking for vsnprintf... yes
checking for stdarg.h... yes
checking for varargs.h... no
checking for strerror... (cached) yes
checking for errno... no
checking for sys_nerr... yes
checking for sys_nerr declaration... 
checking for sys_errlist array... yes
checking for sys_errlist declaration... 
checking for long long... yes
checking for long double... yes
checking for quad_t... yes
checking whether to check for 64bit libraries... yes
checking for administrative group support... yes
checking for cracklib support... no
checking whether to enable DDP... checking whether to enable debugging with debuggers... no
checking for _FILE_OFFSET_BITS value needed for large files... 64
checking for 64 bit off_t... yes
checking if large file support is available... yes
checking for libiconv... yes
checking for working iconv... yes
checking whether iconv supports UCS-2-INTERNAL... no
checking whether or not to use Database Daemon CNID backend... yes
checking whether or not to use LAST DID scheme... yes
checking default DID scheme... dbd
checking whether default CNID scheme has been activated... yes
checking pkg-config is at least version 0.9.0... yes
checking for main in -lrpcsvc... yes
checking for rpc/rpc.h... yes
checking for rpc/pmap_prot.h... yes
checking for rpcsvc/rquota.h... no
checking for getfsquota in -lquota... no
checking whether to enable srvloc (SLP) support... no
checking for avahi-client >= 0.6... no
checking for dns_sd.h... no
checking for dns_sd.h... (cached) no
checking whether to enable Zerconf support... no
checking for PAM installation directory... no
checking for includable common PAM config... no (using defaut pam_unix.so)
checking whether to enable PAM support... no
checking for shadow.h... yes
checking whether shadow support should be enabled... yes
checking whether checking for a valid shell should be enabled... yes
checking whether to enable the TCP wrappers... yes
checking whether system (fcntl) locking should be disabled... no
checking whether to run privileged hooks with make install... yes
checking for docbook-xsl... checking whether to build Docbook documentation... no
checking whether CUPS support can be enabled... no
checking to see if we can add '__attribute__((unused))' to CFLAGS... yes
checking whether to use Filesystem Hierarchy Standard (FHS) compatibility... no
 * Linux specific configuration
checking for struct atalk_addr... yes
checking for netatalk/at.h... yes
checking for sendfile... yes
checking for libgcrypt-config... /usr/pkg/bin/libgcrypt-config
checking for LIBGCRYPT - version >= 1.2.3... yes (1.10.3)
checking libgcrypt API version... okay
checking libgcrypt hast CAST5 API... yes
configure: Enabling DHX2 UAM
checking for SSL... /usr/pkg (enabling RANDNUM and DHX support)
checking for main in -lcrypto... yes
checking for main in -ldes... no
checking for Berkeley DB headers in /usr/pkg/include/... no
checking for Berkeley DB headers in /usr/pkg/include/db5... no
checking for Berkeley DB headers in /usr/pkg/include/db5.3... no
checking for Berkeley DB headers in /usr/pkg/include/db5.2... no
checking for Berkeley DB headers in /usr/pkg/include/db5.1... no
checking for Berkeley DB headers in /usr/pkg/include/db51... no
checking for Berkeley DB headers in /usr/pkg/include/db5.0... no
checking for Berkeley DB headers in /usr/pkg/include/db50... no
checking for Berkeley DB headers in /usr/pkg/include/db4.8... no
checking for Berkeley DB headers in /usr/pkg/include/db48... no
checking for Berkeley DB headers in /usr/pkg/include/db4.7... no
checking for Berkeley DB headers in /usr/pkg/include/db47... no
checking for Berkeley DB headers in /usr/pkg/include/db4.6... no
checking for Berkeley DB headers in /usr/pkg/include/db46... no
checking for Berkeley DB headers in /usr/pkg/include/db4... yes
checking /usr/pkg/include/db4/db.h version >= 4.6.0... yes
checking Berkeley DB library (-ldb48)... 4.8.30 ... yes
checking for crypt.h... yes
checking for main in -lcrypt... yes
checking whether the PGP UAM should be build... no
checking whether Kerberos V UAM should be build... no
checking whether configuration files should be overwritten... yes
checking for LDAP (necessary for client-side ACL visibility)... yes
checking for ldap.h... yes
checking for ldap_init in -lldap... yes
checking whether to support ACLs... auto
configure: checking whether ACL support is available:
checking for acl_get_file in -lacl... no
checking for getxattr in -lattr... no
checking for POSIX ACL support... no
configure: ACL support is not avaliable
checking for sys/attributes.h... no
checking for attr/xattr.h... no
checking for sys/xattr.h... yes
checking for sys/extattr.h... no
checking for sys/uio.h... (cached) yes
checking for sys/ea.h... no
checking for library containing getxattr... none required
checking for getxattr... yes
checking for lgetxattr... yes
checking for fgetxattr... yes
checking for listxattr... yes
checking for llistxattr... yes
checking for flistxattr... yes
checking for removexattr... yes
checking for lremovexattr... yes
checking for fremovexattr... yes
checking for setxattr... yes
checking for lsetxattr... yes
checking for fsetxattr... yes
checking whether xattr interface takes additional options... no
checking if the realpath function allows a NULL argument... yes
checking whether make supports nested variables... (cached) yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating bin/Makefile
config.status: creating bin/ad/Makefile
config.status: creating bin/adv1tov2/Makefile
config.status: creating bin/aecho/Makefile
config.status: creating bin/afppasswd/Makefile
config.status: creating bin/cnid/Makefile
config.status: creating bin/cnid/cnid2_create
config.status: creating bin/getzones/Makefile
config.status: creating bin/megatron/Makefile
config.status: creating bin/misc/Makefile
config.status: creating bin/nbp/Makefile
config.status: creating bin/pap/Makefile
config.status: creating bin/psorder/Makefile
config.status: creating bin/uniconv/Makefile
config.status: creating config/Makefile
config.status: creating config/pam/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/macusers/Makefile
config.status: creating contrib/macusers/macusers
config.status: creating contrib/misc/Makefile
config.status: creating contrib/printing/Makefile
config.status: creating contrib/shell_utils/Makefile
config.status: creating contrib/shell_utils/apple_dump
config.status: creating contrib/shell_utils/asip-status
config.status: creating contrib/timelord/Makefile
config.status: creating contrib/a2boot/Makefile
config.status: creating distrib/Makefile
config.status: creating distrib/config/Makefile
config.status: creating distrib/config/netatalk-config
config.status: creating distrib/initscripts/Makefile
config.status: creating distrib/m4/Makefile
config.status: creating doc/Makefile
config.status: creating doc/html.xsl
config.status: creating doc/man.xsl
config.status: creating doc/manual/Makefile
config.status: creating doc/manual/manual.xml
config.status: creating doc/manual/netatalk.html
config.status: creating doc/manpages/Makefile
config.status: creating doc/manpages/man1/Makefile
config.status: creating doc/manpages/man3/Makefile
config.status: creating doc/manpages/man4/Makefile
config.status: creating doc/manpages/man5/Makefile
config.status: creating doc/manpages/man8/Makefile
config.status: creating etc/Makefile
config.status: creating etc/afpd/Makefile
config.status: creating etc/atalkd/Makefile
config.status: creating etc/cnid_dbd/Makefile
config.status: creating etc/uams/Makefile
config.status: creating etc/papd/Makefile
config.status: creating etc/psf/Makefile
config.status: creating include/Makefile
config.status: creating include/atalk/Makefile
config.status: creating libatalk/Makefile
config.status: creating libatalk/acl/Makefile
config.status: creating libatalk/adouble/Makefile
config.status: creating libatalk/asp/Makefile
config.status: creating libatalk/atp/Makefile
config.status: creating libatalk/bstring/Makefile
config.status: creating libatalk/cnid/Makefile
config.status: creating libatalk/cnid/last/Makefile
config.status: creating libatalk/cnid/dbd/Makefile
config.status: creating libatalk/compat/Makefile
config.status: creating libatalk/dsi/Makefile
config.status: creating libatalk/nbp/Makefile
config.status: creating libatalk/netddp/Makefile
config.status: creating libatalk/util/Makefile
config.status: creating libatalk/unicode/Makefile
config.status: creating libatalk/unicode/charsets/Makefile
config.status: creating libatalk/vfs/Makefile
config.status: creating macros/Makefile
config.status: creating man/Makefile
config.status: creating man/man1/Makefile
config.status: creating man/man1/ad.1
config.status: creating man/man1/aecho.1
config.status: creating man/man1/afpldaptest.1
config.status: creating man/man1/afppasswd.1
config.status: creating man/man1/apple_dump.1
config.status: creating man/man1/asip-status.1
config.status: creating man/man1/cnid2_create.1
config.status: creating man/man1/dbd.1
config.status: creating man/man1/getzones.1
config.status: creating man/man1/macusers.1
config.status: creating man/man1/megatron.1
config.status: creating man/man1/nbp.1
config.status: creating man/man1/netatalk-config.1
config.status: creating man/man1/pap.1
config.status: creating man/man1/psorder.1
config.status: creating man/man1/showppd.1
config.status: creating man/man1/uniconv.1
config.status: creating man/man3/Makefile
config.status: creating man/man3/atalk_aton.3
config.status: creating man/man3/nbp_name.3
config.status: creating man/man4/Makefile
config.status: creating man/man4/atalk.4
config.status: creating man/man5/Makefile
config.status: creating man/man5/afp_ldap.conf.5
config.status: creating man/man5/afp_signature.conf.5
config.status: creating man/man5/afp_voluuid.conf.5
config.status: creating man/man5/afpd.conf.5
config.status: creating man/man5/AppleVolumes.default.5
config.status: creating man/man5/atalkd.conf.5
config.status: creating man/man5/netatalk.conf.5
config.status: creating man/man5/papd.conf.5
config.status: creating man/man8/Makefile
config.status: creating man/man8/a2boot.8
config.status: creating man/man8/afpd.8
config.status: creating man/man8/atalkd.8
config.status: creating man/man8/cnid_dbd.8
config.status: creating man/man8/cnid_metad.8
config.status: creating man/man8/papd.8
config.status: creating man/man8/papstatus.8
config.status: creating man/man8/psf.8
config.status: creating man/man8/timelord.8
config.status: creating sys/Makefile
config.status: creating sys/netatalk/Makefile
config.status: creating sys/solaris/Makefile
config.status: creating test/Makefile
config.status: creating test/afpd/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
/bin/rm: cannot remove 'libtoolT': No such file or directory
config.status: executing default commands
configure: WARNING: unrecognized options: --enable-timelord
Using libraries:
    LIBS = -lpthread  -L$(top_srcdir)/libatalk
    CFLAGS = -I$(top_srcdir)/include -D_U_="__attribute__((unused))" -pipe -O2 -DLDAP_DEPRECATED -I/usr/pkg/include -I/usr/include -I/usr/pkg/include/db4 -I$(top_srcdir)/sys
    SSL:
        LIBS   =  -L/usr/pkg/lib64 -L/usr/pkg -lcrypto
        CFLAGS =  -I/usr/pkg/include -I/usr/pkg/include/openssl
    LIBGCRYPT:
        LIBS   = -L/usr/pkg/lib -Wl,-R/usr/pkg/lib -lgcrypt -lgpg-error
        CFLAGS = -I/usr/pkg/include
    BDB:
        LIBS   =  -L/usr/pkg/lib64 -ldb48
        CFLAGS =  -I/usr/pkg/include/db4
Configure summary:
    Install style:
         none
    AFP:
         Large file support (>2GB) for AFP3: yes
         Extended Attributes: ad | sys
    CNID:
         backends:  dbd last
    UAMS:
         DHX     ( SHADOW)
         DHX2    ( SHADOW)
         RANDNUM (afppasswd)
         clrtxt  ( SHADOW)
         guest
    Options:
         DDP (AppleTalk) support: yes
         CUPS support:            no
         SLP support:             no
         Zeroconf support:        no
         tcp wrapper support:     yes
         quota support:           no
         admin group support:     yes
         valid shell check:       yes
         cracklib support:        no
         ACL support:             no
         LDAP support:            yes
    Documentation:
         Docbook:                 no
=> Modifying libtool scripts to use pkgsrc libtool
=> Modifying libtool scripts to use pkgsrc depcomp