=> Bootstrap dependency digest>=20211023: found digest-20220214
=> Checksum BLAKE2s OK for armagetronad-0.2.9.0.1.tbz
=> Checksum SHA512 OK for armagetronad-0.2.9.0.1.tbz
===> Installing dependencies for armagetronad-0.2.9.0.1nb7
==========================================================================
The following variables will affect the build process of this package,
armagetronad-0.2.9.0.1nb7.  Their current value is shown below:

        * JPEG_DEFAULT = jpeg
        * PKG_SYSCONFBASE = /opt/pkg/etc

Based on these variables, the following variables have been set:

        * JPEGBASE (defined, but empty)
        * JPEG_TYPE = jpeg

You may want to abort the process now with CTRL-C and change the value
of variables in the first group before continuing.  Be sure to run
`/opt/pkg/bin/bmake clean' after the changes.
==========================================================================
=> Tool dependency mktools-[0-9]*: found mktools-20220614
=> Tool dependency gmake>=3.81: found gmake-4.4.1
=> Tool dependency pkgconf-[0-9]*: found pkgconf-2.2.0
=> Tool dependency cwrappers>=20150314: found cwrappers-20220403
=> Tool dependency checkperms>=1.1: found checkperms-1.12
=> Full dependency SDL>=1.2.15nb17: found SDL-1.2.15nb43
=> Full dependency SDL_image>=1.2.12nb6: found SDL_image-1.2.12nb11
=> Full dependency jpeg>=9: found jpeg-9e
=> Full dependency libxml2>=2.10.4nb3: found libxml2-2.12.4
=> Full dependency png>=1.6.0nb1: found png-1.6.43
===> Overriding tools for armagetronad-0.2.9.0.1nb7
===> Extracting for armagetronad-0.2.9.0.1nb7
===> Patching for armagetronad-0.2.9.0.1nb7
===> Creating toolchain wrappers for armagetronad-0.2.9.0.1nb7
===> Configuring for armagetronad-0.2.9.0.1nb7
=> Set proper BASH path.
=> Modifying GNU configure scripts to avoid --recheck
=> Replacing config-guess with pkgsrc versions
=> Replacing config-sub with pkgsrc versions
=> Replacing install-sh with pkgsrc version
=> Checking for portability problems in extracted files
checking build system type... aarch64-apple-darwin22
checking host system type... aarch64-apple-darwin22
checking target system type... aarch64-apple-darwin22
checking for aarch64-apple-darwin22-ranlib... no
checking for ranlib... ranlib
checking for a BSD-compatible install... /usr/bin/install -c -o pbulk -g staff
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... ./install-sh -c -d
checking for gawk... /opt/pkg/bin/nawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether UID '500' is supported by ustar format... yes
checking whether GID '20' is supported by ustar format... yes
checking how to create a ustar tar archive... gnutar
checking whether ln -s works... yes
checking for m4... true
checking pkg-config is at least version 0.9.0... yes
checking whether make supports the include directive... yes (GNU style)
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether clang++ accepts -g... yes
checking dependency style of clang++... gcc3
checking CXXFLAGS for gcc -std=c++11... -std=c++11
checking for aarch64-apple-darwin22-gcc... clang
checking whether we are using the GNU C compiler... yes
checking whether clang accepts -g... yes
checking for clang option to accept ISO C89... none needed
checking whether clang understands -c and -o together... yes
checking dependency style of clang... gcc3
checking how to run the C preprocessor... clang -E
checking whether we are using the GNU C++ compiler... (cached) yes
checking whether clang++ accepts -g... (cached) yes
checking dependency style of clang++... (cached) gcc3
checking how to run the C++ preprocessor... clang++ -E
checking for gmake... yes
checking for bash... yes
checking whether make understands sinclude... yes
checking for socklen_t... yes
checking for XML2... yes
checking for zthread-config... no
checking for ZTHREAD - version >= 2.3.2... no
*** The zthread-config script installed by ZThread could not be found
*** If ZThread was installed in PREFIX, make sure PREFIX/bin is in
*** your path, or set the ZTHREAD_CONFIG environment variable to the
*** full path to zthread-config.
checking whether SDL is installed... yes
checking for SDL_Init... yes
checking whether libpng is installed... yes
checking for png_sig_cmp... yes
checking for IMG_Load in -lSDL_image... yes
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... (cached) /usr/bin/egrep
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking SDL_image.h usability... yes
checking SDL_image.h presence... yes
checking for SDL_image.h... yes
checking for ANSI C header files... (cached) yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for select... yes
checking for isblank... yes
checking for atan2f... yes
checking for sinf... yes
checking for cosf... yes
checking for tanf... yes
checking for sqrtf... yes
checking for logf... yes
checking for expf... yes
checking for fabsf... yes
checking for floorf... yes
checking for wmemset... yes
checking for clearenv... no
configure: WARNING: Path sysconfdir(=/opt/pkg/etc) does not begin with the right prefix(=${prefix}),
disabling relocation support. You can try to enforce it with --enable-binreloc,
but you are on your own then.
checking whether binary relocation support should be enabled... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating src/first/Makefile
config.status: creating Makefile
config.status: creating batch/Makefile
config.status: creating language/languages.txt
config.status: creating config/rc.config
config.status: creating config/aiplayers.cfg
config.status: creating src/doc/Makefile
config.status: creating src/doc/net/Makefile
config.status: creating src/doc/Doxyfile
config.status: creating src/doc/html.m4
config.status: creating src/thirdparty/Makefile
config.status: creating src/thirdparty/particles/Makefile
config.status: creating resource/Makefile
config.status: creating config/Makefile
config.status: creating desktop/Makefile
config.status: creating docker/build/Makefile
config.status: creating docker/build/setup_ci_test.sh
config.status: creating docker/build/context/version.sh
config.status: creating docker/deploy/targets.sh
config.status: creating desktop/armagetronad.desktop
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing universal_variables commands
config.status: executing pathsubstitution commands
Configuration complete!

Options selected are:
     Build Regular Game Client: true
     Build Dedicated Server: false
     Build Master Server: false

Installation options:
     Prefix: /opt/pkg

     Binaries will be installed in      : ${prefix}/bin
     Static data will be installed in   : ${prefix}/share/armagetronad
     Configuration will be installed in : /opt/pkg/etc/armagetronad
     Documentation will be installed in : ${datadir}/doc/armagetronad
     Link to configuration will go to   : /etc/armagetronad
     Music support: no
     Build with Krawall authentication support: no
     Use dirty SDL initialization: no
     Call sysinstall: no
     Generate uninstall: no
     Allow multiple versions: no
     Use custom memory manager: no
     Debug level : 0
     Code level  : 0
     CPPFLAGS    : -iquote . -iquote .. -DPNG_NO_ASSEMBLER_CODE -I/opt/pkg/include -I/opt/pkg/include/SDL -I/opt/pkg/include/libxml2 -I/opt/pkg/include -I/opt/pkg/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -I/opt/pkg/include/libpng16
     CXXFLAGS    : -pipe -Os -I/opt/pkg/include -I/opt/pkg/include/SDL -std=c++11 -Wno-long-long 
     LIBS        : -lSDL_image -L/opt/pkg/lib -lSDLmain -lSDL -Wl,-framework,Cocoa  -L/opt/pkg/lib -lxml2  -L/opt/pkg/lib -L/opt/pkg/lib -lpng16 -lz

Warning: The configure script decided that, to better work on your system,
  it would be a good idea to modify files outside of /opt/pkg
   during installation or while running. If you disagree, rerun configure with
    --disable-etc
  after consulting "configure --help" for the effects; if you want to get rid
  of this warning, pass the corresponding opposite switches.