=> Bootstrap dependency digest>=20211023: found digest-20220214 => Checksum BLAKE2s OK for x11vnc-0.9.16.tar.gz => Checksum SHA512 OK for x11vnc-0.9.16.tar.gz ===> Installing dependencies for x11vnc-0.9.16nb12 ========================================================================== The supported build options for x11vnc are: avahi x11 The currently selected options are: x11 You can select which build options to use by setting PKG_DEFAULT_OPTIONS or the following variable. Its current value is shown: PKG_OPTIONS.x11vnc (not defined) ========================================================================== ========================================================================== The following variables will affect the build process of this package, x11vnc-0.9.16nb12. Their current value is shown below: * JPEG_DEFAULT = jpeg * SSLBASE (defined) * SSLCERTBUNDLE (not defined) * SSLCERTS = /opt/pkg/etc/openssl/certs * SSLDIR = /opt/pkg/etc/openssl * SSLKEYS = /opt/pkg/etc/openssl/private Based on these variables, the following variables have been set: * JPEGBASE (defined, but empty) * JPEG_TYPE = jpeg You may want to abort the process now with CTRL-C and change the value of variables in the first group before continuing. Be sure to run `/opt/pkg/bin/bmake clean' after the changes. ========================================================================== => Tool dependency mktools-[0-9]*: found mktools-20220614 => Tool dependency automake>=1.9: found automake-1.16.5nb2 => Tool dependency autoconf>=2.58: found autoconf-2.71nb2 => Tool dependency gmake>=3.81: found gmake-4.4 => Tool dependency nbpatch-[0-9]*: found nbpatch-20151107 => Tool dependency pkgconf-[0-9]*: found pkgconf-1.8.0 => Tool dependency cwrappers>=20150314: found cwrappers-20220403 => Tool dependency checkperms>=1.1: found checkperms-1.12 => Build dependency xorgproto>=2016.1: found xorgproto-2022.2 => Build dependency xcb-proto>=1.4: found xcb-proto-1.15.2nb1 => Build dependency libXt>=1.0.0: found libXt-1.2.1 => Full dependency libX11>=1.5: found libX11-1.8.3 => Full dependency libXcomposite>=0.3.1: found libXcomposite-0.4.6 => Full dependency libXext>=1.1: found libXext-1.3.5 => Full dependency libXfixes>=4.0.1: found libXfixes-6.0.0 => Full dependency libXcursor>=1.1.1: found libXcursor-1.2.1 => Full dependency libXdamage>=1.0.3: found libXdamage-1.1.6 => Full dependency libXinerama>=1.0.1: found libXinerama-1.1.5 => Full dependency libXrandr>=1.1.2: found libXrandr-1.5.3 => Full dependency libXtst>=1.0.1: found libXtst-1.2.4 => Full dependency openssl>=1.1.1pnb1: found openssl-1.1.1s => Full dependency libVNCServer>=0.9.13nb4: found libVNCServer-0.9.13nb4 => Full dependency png>=1.6.0nb1: found png-1.6.39 ===> Overriding tools for x11vnc-0.9.16nb12 ===> Extracting for x11vnc-0.9.16nb12 ===> Patching for x11vnc-0.9.16nb12 => Applying pkgsrc patches for x11vnc-0.9.16nb12 => Verifying /Volumes/data/jenkins/workspace/pkgsrc-macos11-trunk-arm64/x11/x11vnc/patches/patch-configure.ac => Applying pkgsrc patch /Volumes/data/jenkins/workspace/pkgsrc-macos11-trunk-arm64/x11/x11vnc/patches/patch-configure.ac Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |$NetBSD: patch-configure.ac,v 1.2 2018/12/18 15:53:46 tnn Exp $ | |* check openpty(3) | |--- configure.ac.orig 2018-02-04 21:43:38.000000000 +0000 |+++ configure.ac -------------------------- Patching file configure.ac using Plan A... Hunk #1 succeeded at 511. done => Verifying /Volumes/data/jenkins/workspace/pkgsrc-macos11-trunk-arm64/x11/x11vnc/patches/patch-x11vnc_unixpw.c => Applying pkgsrc patch /Volumes/data/jenkins/workspace/pkgsrc-macos11-trunk-arm64/x11/x11vnc/patches/patch-x11vnc_unixpw.c Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |$NetBSD: patch-x11vnc_unixpw.c,v 1.2 2018/12/18 15:53:46 tnn Exp $ | |* Use openpty(3) if available | |--- src/unixpw.c.orig 2018-02-04 21:43:38.000000000 +0000 |+++ src/unixpw.c -------------------------- Patching file src/unixpw.c using Plan A... Hunk #1 succeeded at 92. Hunk #2 succeeded at 593. Hunk #3 succeeded at 654. Hunk #4 succeeded at 667. done ===> Creating toolchain wrappers for x11vnc-0.9.16nb12 ===> Configuring for x11vnc-0.9.16nb12 => Substituting "pthread" in configure INFO: [subst.mk:pthread] Ignoring nonexistent file "configure". cd /Users/pbulk/build/x11/x11vnc/work/x11vnc-0.9.16 && autoreconf -vif autoreconf: export WARNINGS= autoreconf: Entering directory '.' autoreconf: configure.ac: not using Gettext autoreconf: running: aclocal --force -I m4 autoreconf: configure.ac: tracing autoreconf: configure.ac: not using Libtool autoreconf: configure.ac: not using Intltool autoreconf: configure.ac: not using Gtkdoc autoreconf: running: /opt/pkg/bin/autoconf --force configure.ac:5: warning: 'AM_CONFIG_HEADER': this macro is obsolete. configure.ac:5: You should use the 'AC_CONFIG_HEADERS' macro instead. ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... aclocal.m4:1125: AM_CONFIG_HEADER is expanded from... configure.ac:5: the top level configure.ac:444: warning: The macro `AC_HEADER_STDC' is obsolete. configure.ac:444: You should run autoupdate. ./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from... configure.ac:444: the top level configure.ac:454: warning: The macro `AC_HEADER_TIME' is obsolete. configure.ac:454: You should run autoupdate. ./lib/autoconf/headers.m4:743: AC_HEADER_TIME is expanded from... configure.ac:454: the top level configure.ac:456: warning: The macro `AC_TRY_COMPILE' is obsolete. configure.ac:456: You should run autoupdate. ./lib/autoconf/general.m4:2847: AC_TRY_COMPILE is expanded from... lib/m4sugar/m4sh.m4:692: _AS_IF_ELSE is expanded from... lib/m4sugar/m4sh.m4:699: AS_IF is expanded from... ./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from... ./lib/autoconf/general.m4:2270: AC_CACHE_CHECK is expanded from... m4/ax_type_socklen_t.m4:48: AX_TYPE_SOCKLEN_T is expanded from... configure.ac:456: the top level configure.ac:457: warning: The macro `AC_TRY_COMPILE' is obsolete. configure.ac:457: You should run autoupdate. ./lib/autoconf/general.m4:2847: AC_TRY_COMPILE is expanded from... lib/m4sugar/m4sh.m4:692: _AS_IF_ELSE is expanded from... lib/m4sugar/m4sh.m4:699: AS_IF is expanded from... ./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from... ./lib/autoconf/general.m4:2270: AC_CACHE_CHECK is expanded from... configure.ac:457: the top level autoreconf: running: /opt/pkg/bin/autoheader --force autoreconf: running: automake --add-missing --copy --force-missing configure.ac:10: installing './compile' configure.ac:432: installing './config.guess' configure.ac:432: installing './config.sub' configure.ac:3: installing './install-sh' configure.ac:3: installing './missing' Makefile.am: installing './INSTALL' src/Makefile.am: installing './depcomp' autoreconf: Leaving directory '.' => Modifying GNU configure scripts to avoid --recheck => Replacing config-guess with pkgsrc versions => Replacing config-sub with pkgsrc versions => Replacing install-sh with pkgsrc version => Checking for portability problems in extracted files WARNING: [check-portability.awk] => Found $RANDOM: WARNING: [check-portability.awk] misc/Xdummy.in:539: tmp=$tdir/Xdummy.$RANDOM$$.c Explanation: =========================================================================== The variable $RANDOM is not required for a POSIX-conforming shell, and many implementations of /bin/sh do not support it. It should therefore not be used in shell programs that are meant to be portable across a large number of POSIX-like systems. =========================================================================== configure: WARNING: unrecognized options: --with-libiconv-prefix checking for a BSD-compatible install... /usr/bin/install -c -o pbulk -g staff checking whether build environment is sane... yes checking for a race-free mkdir -p... ./install-sh -c -d checking for gawk... /opt/pkg/bin/nawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether to enable maintainer-specific portions of Makefiles... yes checking for aarch64-apple-darwin22-gcc... clang checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether clang accepts -g... yes checking for clang option to enable C11 features... none needed checking whether clang understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of clang... gcc3 checking for a sed that does not truncate output... /opt/pkg/bin/nbsed checking pkg-config is at least version 0.9.0... yes checking for RAND_file_name in -lcrypto... yes checking for crypt... yes checking for OPENSSL... yes checking how to run the C preprocessor... clang -E checking for X... libraries , headers checking for gethostbyname... yes checking for connect... yes checking for remove... yes checking for shmat... yes checking for IceConnectionNumber in -lICE... yes checking for XGetImage in -lX11... yes checking for XShmGetImage in -lXext... yes checking for XReadScreen in -lXext... no checking for X11/extensions/readdisplay.h... no checking for FBPMForceLevel in -lXext... no checking for DPMSForceLevel in -lXext... yes checking for XTestGrabControl in -lXtst... yes checking for XTestFakeKeyEvent in -lXtst... yes checking for XRecordEnableContextAsync in -lXtst... yes checking for X11/XKBlib.h... yes checking for XkbSelectEvents in -lX11... yes checking for XineramaQueryScreens in -lXinerama... yes checking for XRRSelectInput in -lXrandr... yes checking for XFixesGetCursorImage in -lXfixes... yes checking for XDamageQueryExtension in -lXdamage... yes checking for XCompositeQueryExtension in -lXcomposite... yes checking for XI2... yes checking for XcursorImageLoadCursor in -lXcursor... yes checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for sys/time.h... yes checking for vfork.h... no checking for linux/videodev.h... no checking for linux/fb.h... no checking for linux/input.h... no checking for OpenGL/OpenGL.h... yes checking for cairo... no checking for LIBVNCSERVER... yes checking for LIBVNCCLIENT... yes checking build system type... aarch64-apple-darwin22 checking host system type... aarch64-apple-darwin22 checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for arpa/inet.h... yes checking for endian.h... no checking for fcntl.h... yes checking for netdb.h... yes checking for netinet/in.h... yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for sys/endian.h... no checking for sys/socket.h... yes checking for sys/time.h... (cached) yes checking for sys/timeb.h... yes checking for syslog.h... yes checking for unistd.h... (cached) yes checking for ws2tcpip.h... no checking for pwd.h... yes checking for sys/wait.h... yes checking for utmpx.h... yes checking for termios.h... yes checking for sys/ioctl.h... yes checking for sys/stropts.h... no checking for an ANSI C-conforming const... yes checking for inline... inline checking whether byte ordering is bigendian... no checking for size_t... yes checking for sys/wait.h that is POSIX.1 compatible... (cached) yes checking for socklen_t... yes checking for in_addr_t... checking for working memcmp... yes checking whether lstat correctly handles trailing slash... no checking whether stat accepts an empty string... no checking for strftime... yes checking for vprintf... yes checking for fork... yes checking for vfork... yes checking for pid_t... yes checking for working fork... yes checking for working vfork... (cached) yes checking for gethostbyname in -lnsl... no checking for socket in -lsocket... no checking for ftime... yes checking for gethostbyname... (cached) yes checking for gethostname... yes checking for gettimeofday... yes checking for inet_ntoa... yes checking for memmove... yes checking for memset... yes checking for mmap... yes checking for mkfifo... yes checking for select... yes checking for socket... yes checking for strchr... yes checking for strcspn... yes checking for strdup... yes checking for strerror... yes checking for strstr... yes checking for setsid... yes checking for setpgrp... yes checking for getpwuid... yes checking for getpwnam... yes checking for getspnam... no checking for getuid... yes checking for geteuid... yes checking for setuid... yes checking for setgid... yes checking for seteuid... yes checking for setegid... yes checking for initgroups... yes checking for waitpid... yes checking for setutxent... yes checking for grantpt... yes checking for shmat... (cached) yes checking for shmget in -lcygipc... no checking for ApplicationServices/ApplicationServices.h... yes checking for android/api-level.h... no checking for pty.h... no checking for libutil.h... no checking for util.h... yes checking for library containing openpty... none required checking for rpm sources path... NOT-FOUND checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating misc/Makefile config.status: creating misc/turbovnc/Makefile config.status: creating config.h config.status: executing depfiles commands configure: WARNING: unrecognized options: --with-libiconv-prefix