# Xserver Provider for DTrace

Alan
Coopersmith
Oracle Corporation
Solaris Engineering
X Server Version &xserver.version;
2005
2006
2007
2010
Oracle and/or its affiliates. All rights reserved.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice (including the next paragraph) shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

## Introduction

This page provides details on a statically defined user application tracing provider for the DTrace facility in Solaris 10, MacOS X 10.5, and later releases. This provider instruments various points in the X server, to allow tracing what client applications are up to.

The provider was integrated into the X.Org git master repository with Solaris 10 & OpenSolaris support for the Xserver 1.4 release, released in 2007 with X11R7.3. Support for DTrace on MacOS X was added in Xserver 1.7.

These probes expose the request and reply structure of the X protocol between clients and the X server, so an understanding of that basic nature will aid in learning how to use these probes.

## Available probes

Due to the way User-Defined DTrace probes work, arguments to these probes all bear undistinguished names of `arg0`, `arg1`, `arg2`, etc. These tables should help you determine what the real data is for each of the probe arguments.

### Probes and their arguments

Probe name | Description | arg0 | arg1 | arg2 | arg3 | arg4
--- | --- | --- | --- | --- | --- | ---
Request Probes
request-start | Called just before processing each client request. | `requestName` | `requestCode` | `requestLength` | `clientId` | `requestBuffer`
request-done | Called just after processing each client request. | `requestName` | `requestCode` | `sequenceNumber` | `clientId` | `resultCode`
Event Probes
send-event | Called just before send each event to a client. | `clientId` | `eventCode` | `eventBuffer` |
Client Connection Probes
client-connect | Called when a new connection is opened from a client | `clientId` | `clientFD` |
client-auth | Called when client authenticates (normally just after connection opened) | `clientId` | `clientAddr` | `clientPid` | `clientZoneId` |
client-disconnect | Called when a client connection is closed | `clientId` |
Resource Allocation Probes
resource-alloc | Called when a new resource (pixmap, gc, colormap, etc.) is allocated | `resourceId` | `resourceTypeId` | `resourceValue` | `resourceTypeName` |
resource-free | Called when a resource is freed | `resourceId` | `resourceTypeId` | `resourceValue` | `resourceTypeName` |

## Data Available in Probe Arguments

To access data in arguments of type string, you will need to use `copyinstr()`. To access data buffers referenced via uintptr_t's, you will need to use `copyin()`.

### Probe Arguments

Argument name | Type | Description
--- | --- | ---
`clientAddr` | string | String representing address client connected from
`clientFD` | int | X server's file descriptor for server side of each connection
`clientId` | int | Unique integer identifier for each connection to the X server
`clientPid` | pid_t | Process id of client, if connection is local (from `getpeerucred()`)
`clientZoneId` | zoneid_t | Solaris: Zone id of client, if connection is local (from `getpeerucred()`)
`eventBuffer` | uintptr_t | Pointer to buffer containing X event - decode using structures in <`X11/Xproto.h`> and similar headers for each extension
`eventCode` | uint8_t | Event number of X event
`resourceId` | uint32_t | X resource id (XID)
`resourceTypeId` | uint32_t | Resource type id
`resourceTypeName` | string | String representing X resource type (`"PIXMAP"`, etc.)
`resourceValue` | uintptr_t | Pointer to data for X resource
`resultCode` | int | Integer code representing result status of request
`requestBuffer` | uintptr_t | Pointer to buffer containing X request - decode using structures in <`X11/Xproto.h`> and similar headers for each extension
`requestCode` | uint8_t | Request number of X request or Extension
`requestName` | string | Name of X request or Extension
`requestLength` | uint16_t | Length of X request
`sequenceNumber` | uint32_t | Number of X request in in this connection

## Examples

### Counting requests by request name

This script simply increments a counter for each different request made, and when you exit the script (such as by hitting Control C ) prints the counts.

    #!/usr/sbin/dtrace -s

    Xserver*:::request-start
    {
        @counts[copyinstr(arg0)] = count();
    }

The output from a short run may appear as:

      QueryPointer                                                      1
      CreatePixmap                                                      2
      FreePixmap                                                        2
      PutImage                                                          2
      ChangeGC                                                         10
      CopyArea                                                         10
      CreateGC                                                         14
      FreeGC                                                           14
      RENDER                                                           28
      SetClipRectangles                                                40

This can be rewritten slightly to cache the string containing the name of the request since it will be reused many times, instead of copying it over and over from the kernel:

    #!/usr/sbin/dtrace -s

    string Xrequest[uintptr_t];

    Xserver*:::request-start
    /Xrequest[arg0] == ""/
    {
        Xrequest[arg0] = copyinstr(arg0);
    }

    Xserver*:::request-start
    {
        @counts[Xrequest[arg0]] = count();
    }

### Get average CPU time per request

This script records the CPU time used between the probes at the start and end of each request and aggregates it per request type.

    #!/usr/sbin/dtrace -s

    Xserver*:::request-start
    {
        reqstart = vtimestamp;
    }

    Xserver*:::request-done
    {
        @times[copyinstr(arg0)] = avg(vtimestamp - reqstart);
    }

The output from a sample run might look like:

      ChangeGC                                                        889
      MapWindow                                                       907
      SetClipRectangles                                              1319
      PolyPoint                                                      1413
      PolySegment                                                    1434
      PolyRectangle                                                  1828
      FreeCursor                                                     1895
      FreeGC                                                         1950
      CreateGC                                                       2244
      FreePixmap                                                     2246
      GetInputFocus                                                  2249
      TranslateCoords                                                8508
      QueryTree                                                      8846
      GetGeometry                                                    9948
      CreatePixmap                                                  12111
      AllowEvents                                                   14090
      GrabServer                                                    14791
      MIT-SCREEN-SAVER                                              16747
      ConfigureWindow                                               22917
      SetInputFocus                                                 28521
      PutImage                                                     240841

### Monitoring clients that connect and disconnect

This script simply prints information about each client that connects or disconnects from the server while it is running. Since the provider is specified as `Xserver$1` instead of `Xserver*` like previous examples, it won't monitor all Xserver processes running on the machine, but instead expects the process id of the X server to monitor to be specified as the argument to the script.

    #!/usr/sbin/dtrace -s

    Xserver$1:::client-connect
    {
    	printf("** Client Connect: id %d\n", arg0);
    }

    Xserver$1:::client-auth
    {
    	printf("** Client auth'ed: id %d => %s pid %d\n",
    		arg0, copyinstr(arg1), arg2);
    }

    Xserver$1:::client-disconnect
    {
    	printf("** Client Disconnect: id %d\n", arg0);
    }

A sample run:

    # ./foo.d 5790
    dtrace: script './foo.d' matched 4 probes
    CPU     ID                    FUNCTION:NAME
      0  15774 CloseDownClient:client-disconnect ** Client Disconnect: id 65

      2  15774 CloseDownClient:client-disconnect ** Client Disconnect: id 64

      0  15773 EstablishNewConnections:client-connect ** Client Connect: id 64

      0  15772            AuthAudit:client-auth ** Client auth'ed: id 64 => local host pid 2034

      0  15773 EstablishNewConnections:client-connect ** Client Connect: id 65

      0  15772            AuthAudit:client-auth ** Client auth'ed: id 65 => local host pid 2034

      0  15774 CloseDownClient:client-disconnect ** Client Disconnect: id 64

### Monitoring clients creating Pixmaps

This script can be used to determine which clients are creating pixmaps in the X server, printing information about each client as it connects to help trace it back to the program on the other end of the X connection.

    #!/usr/sbin/dtrace -qs

    string Xrequest[uintptr_t];
    string Xrestype[uintptr_t];

    Xserver$1:::request-start
    /Xrequest[arg0] == ""/
    {
    	Xrequest[arg0] = copyinstr(arg0);
    }

    Xserver$1:::resource-alloc
    /arg3 != 0 && Xrestype[arg3] == ""/
    {
    	Xrestype[arg3] = copyinstr(arg3);
    }

    Xserver$1:::request-start
    /Xrequest[arg0] == "X_CreatePixmap"/
    {
    	printf("-> %s: client %d\n", Xrequest[arg0], arg3);
    }

    Xserver$1:::request-done
    /Xrequest[arg0] == "X_CreatePixmap"/
    {
    	printf("<- %s: client %d\n", Xrequest[arg0], arg3);
    }

    Xserver$1:::resource-alloc
    /Xrestype[arg3] == "PIXMAP"/
    {
    	printf("** Pixmap alloc: %08x\n", arg0);
    }

    Xserver$1:::resource-free
    /Xrestype[arg3] == "PIXMAP"/
    {
    	printf("** Pixmap free:  %08x\n", arg0);
    }

    Xserver$1:::client-connect
    {
    	printf("** Client Connect: id %d\n", arg0);
    }

    Xserver$1:::client-auth
    {
    	printf("** Client auth'ed: id %d => %s pid %d\n",
    		arg0, copyinstr(arg1), arg2);
    }

    Xserver$1:::client-disconnect
    {
    	printf("** Client Disconnect: id %d\n", arg0);
    }

Sample output from a run of this script:

    ** Client Connect: id 17
    ** Client auth'ed: id 17 => local host pid 20273
    -> X_CreatePixmap: client 17
    ** Pixmap alloc: 02200009
    <- X_CreatePixmap: client 17
    -> X_CreatePixmap: client 15
    ** Pixmap alloc: 01e00180
    <- X_CreatePixmap: client 15
    -> X_CreatePixmap: client 15
    ** Pixmap alloc: 01e00181
    <- X_CreatePixmap: client 15
    -> X_CreatePixmap: client 14
    ** Pixmap alloc: 01c004c8
    <- X_CreatePixmap: client 14
    ** Pixmap free:  02200009
    ** Client Disconnect: id 17
    ** Pixmap free:  01e00180
    ** Pixmap free:  01e00181